Add flags for the interrupts present in HDMI wrapper block, these will be used
to configure HDMI_IRQENABLE_SET/CLEAR and HDMI_IRQSTATUS registers.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/video/omap2/dss/hdmi_phy.c | 3 ---
drivers/video/omap2/dss/ti_hdmi.h | 15 +++++++++++++++
2 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/video/omap2/dss/hdmi_phy.c b/drivers/video/omap2/dss/hdmi_phy.c
index b79c56b..b7d171c 100644
--- a/drivers/video/omap2/dss/hdmi_phy.c
+++ b/drivers/video/omap2/dss/hdmi_phy.c
@@ -17,9 +17,6 @@
#include "dss.h"
#include "ti_hdmi.h"
-#define HDMI_IRQ_LINK_CONNECT (1 << 25)
-#define HDMI_IRQ_LINK_DISCONNECT (1 << 26)
-
void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
{
#define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index cf096fd..5034080 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -49,6 +49,21 @@
#define HDMI_WP_AUDIO_CTRL 0x88
#define HDMI_WP_AUDIO_DATA 0x8C
+/* HDMI WP IRQ flags */
+
+#define HDMI_IRQ_OCP_TIMEOUT (1 << 4)
+#define HDMI_IRQ_AUDIO_FIFO_UNDERFLOW (1 << 8)
+#define HDMI_IRQ_AUDIO_FIFO_OVERFLOW (1 << 9)
+#define HDMI_IRQ_AUDIO_FIFO_SAMPLE_REQ (1 << 10)
+#define HDMI_IRQ_VIDEO_VSYNC (1 << 16)
+#define HDMI_IRQ_VIDEO_FRAME_DONE (1 << 17)
+#define HDMI_IRQ_PHY_LINE5V_ASSERT (1 << 24)
+#define HDMI_IRQ_LINK_CONNECT (1 << 25)
+#define HDMI_IRQ_LINK_DISCONNECT (1 << 26)
+#define HDMI_IRQ_PLL_LOCK (1 << 29)
+#define HDMI_IRQ_PLL_UNLOCK (1 << 30)
+#define HDMI_IRQ_PLL_RECAL (1 << 31)
+
/* HDMI PLL */
#define PLLCTRL_PLL_CONTROL 0x0
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
