On 9/2/2013 10:33 PM, Sekhar Nori wrote: > On 8/29/2013 7:21 PM, Santosh Shilimkar wrote: >> On Thursday 29 August 2013 09:50 AM, Rajendra Nayak wrote: >>> On Thursday 29 August 2013 07:01 PM, Santosh Shilimkar wrote: >>>> On Thursday 29 August 2013 09:26 AM, Sekhar Nori wrote: >>>>> On 8/29/2013 4:53 PM, Rajendra Nayak wrote: >>>>>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi >>>>>> index 22d9f2b..1ba6a77 100644 >>>>>> --- a/arch/arm/boot/dts/omap4.dtsi >>>>>> +++ b/arch/arm/boot/dts/omap4.dtsi >>>>>> @@ -126,6 +126,11 @@ >>>>>> pinctrl-single,function-mask = <0x7fff>; >>>>>> }; >>>>>> >>>>>> + ocmcram: ocmcram@40304000 { >>>>> >>>>> This can now be changed to 0x40300000 now that you have moved to >>>>> gen_pool_alloc()? >>>>> >>>> NO. >>>> It won't work on secure devices since first 16 KB is occupied for >>>> default configuration. Its not worth trouble also to handle >>>> secure/non-secure considering the use of SRAM which is actually just >>>> limited to errata. 40304000 will work for both devices. >>> >>> Right. Sekhar, you might have confused because of the existing buggy code >>> in sram.c and sram.h which did this (and is removed in this series) >>> >>> from sram.c >>> ----------- >>> #define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800) >>> #define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000) >>> -#ifdef CONFIG_OMAP4_ERRATA_I688 >>> -#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA >>> -#else >>> -#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) >>> -#endif >>> -#define OMAP5_SRAM_PA 0x40300000 >>> >>> from sram.h >>> ----------- >>> #define OMAP2_SRAM_PA 0x40200000 >>> #define OMAP3_SRAM_PA 0x40200000 >>> -#ifdef CONFIG_OMAP4_ERRATA_I688 >>> -#define OMAP4_SRAM_PA 0x40304000 >>> -#define OMAP4_SRAM_VA 0xfe404000 >>> -#else >>> -#define OMAP4_SRAM_PA 0x40300000 >>> -#endif >>> >>> I am not sure where the checks for CONFIG_OMAP4_ERRATA_I688 >>> came in from, but these are done, like Santosh said, to handle >>> secure and non-secure sram across GP and HS devices and in >>> no way related to handling errata I688. >>> >> The check was to ensure that with errata enabled, we don't care >> about first 16 KB ;-) > > Hi Rajendra, thanks for the explanation. Other devices like AM437x which > have HS variants might need such adjustment too. It will be nice to > check that. So I checked with folks working on the HS variant and what you have for AM437x is just fine. The secure runtime uses a different SRAM bank and even if there is a need to use the GP SRAM, the space will first be carved using gen_pool APIs on Linux. Only requirement from secure runtime software is physically contiguous area - which I think gen_pool_alloc() guarantees. Thanks, Sekhar -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html