On Tuesday 27 August 2013 06:55 PM, Santosh Shilimkar wrote: > + Paul, > > On Tuesday 27 August 2013 06:11 AM, Rajendra Nayak wrote: >> Make all OMAP DT only platforms (am33xx, am43xx, omap4 and omap5) >> use drivers/misc/sram.c driver instead of the omap internal >> implementation for SRAM handling. >> >> Rajendra Nayak (2): >> ARM: AM335x: Get rid of unused sram init function >> ARM: OMAP4+: Move SRAM data to DT >> >> arch/arm/boot/dts/am33xx.dtsi | 5 +++++ >> arch/arm/boot/dts/am4372.dtsi | 5 +++++ >> arch/arm/boot/dts/omap4.dtsi | 5 +++++ >> arch/arm/boot/dts/omap5.dtsi | 5 +++++ >> arch/arm/configs/omap2plus_defconfig | 1 + >> arch/arm/mach-omap2/sram.c | 39 +--------------------------------- >> arch/arm/mach-omap2/sram.h | 1 - >> 7 files changed, 22 insertions(+), 39 deletions(-) >> > Really nice to see the SRAM code getting moved now. Thanks > a lot Rajendra. > > - The sram_init() seems to be the post core init call. > Hope this is not a problem for SDRC init which needs to have > SRAM ready to update the DDR parameters. It should be fine given its needed only during core dvfs. Besides drivers/misc/sram.c is useful only on DT platforms, so for now OMAP2/3 continue to use the omap specific sram handling. > > Regards, > Santosh > > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html