Hi Laurent,
On Tuesday 27 of August 2013 10:02:39 Laurent Pinchart wrote:
> Add DT bindings for the pcf857x-compatible chips and parse the device
> tree node in the driver.
>
> Signed-off-by: Laurent Pinchart
> <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> ---
> .../devicetree/bindings/gpio/gpio-pcf857x.txt | 71
> ++++++++++++++++++++++ drivers/gpio/gpio-pcf857x.c
> | 44 +++++++++++--- 2 files changed, 107 insertions(+), 8
> deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
>
> Changes since v4:
>
> - Don't try to get ngpio from of_device_id data, we already get it from
> i2c_device_id
Hmm, I'm not sure how this is supposed to work.
How does the I2C core resolve OF compatible name to particular entry in
id_table? I believe it simply passes NULL as the second argument of
.probe() if the device is instantiated based on OF compatible string and
not one in the legacy ID table.
>
> Changes since v3:
>
> - Get rid of the #ifdef CONFIG_OF in the probe function
> - Give DT node priority over platform data
>
> Changes since v2:
>
> - Replace mention about interrupts software configuration in DT bindings
> documentation with an explanation of the hardware configuration.
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
> b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt new file mode
> 100644
> index 0000000..d261391
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
> @@ -0,0 +1,71 @@
> +* PCF857x-compatible I/O expanders
> +
> +The PCF857x-compatible chips have "quasi-bidirectional" I/O pins that
> can be +driven high by a pull-up current source or driven low to
> ground. This combines +the direction and output level into a single bit
> per pin, which can't be read +back. We can't actually know at
> initialization time whether a pin is configured +(a) as output and
> driving the signal low/high, or (b) as input and reporting a +low/high
> value, without knowing the last value written since the chip came out
> +of reset (if any). The only reliable solution for setting up pin
> direction is +thus to do it explicitly.
> +
> +Required Properties:
> +
> + - compatible: should be one of the following.
> + - "maxim,max7328": For the Maxim MAX7378
> + - "maxim,max7329": For the Maxim MAX7329
> + - "nxp,pca8574": For the NXP PCA8574
> + - "nxp,pca8575": For the NXP PCA8575
> + - "nxp,pca9670": For the NXP PCA9670
> + - "nxp,pca9671": For the NXP PCA9671
> + - "nxp,pca9672": For the NXP PCA9672
> + - "nxp,pca9673": For the NXP PCA9673
> + - "nxp,pca9674": For the NXP PCA9674
> + - "nxp,pca9675": For the NXP PCA9675
> + - "nxp,pcf8574": For the NXP PCF8574
> + - "nxp,pcf8574a": For the NXP PCF8574A
> + - "nxp,pcf8575": For the NXP PCF8575
> + - "ti,tca9554": For the TI TCA9554
> +
> + - reg: I2C slave address.
> +
> + - gpio-controller: Marks the device node as a gpio controller.
> + - #gpio-cells: Should be 2. The first cell is the GPIO number and the
> second + cell specifies GPIO flags, as defined in
> <dt-bindings/gpio/gpio.h>. Only the + GPIO_ACTIVE_HIGH and
> GPIO_ACTIVE_LOW flags are supported. +
> +Optional Properties:
> +
> + - pins-initial-state: Bitmask that specifies the initial state of
> each pin. + When a bit is set to zero, the corresponding pin will be
> initialized to the + input (pulled-up) state. When the bit is set to
> one, the pin will be + initialized the the low-level output state. If
> the property is not specified + all pins will be initialized to the
> input state.
> +
> + The I/O expander can detect input state changes, and thus optionally
> act as + an interrupt controller. When the expander interrupt pin is
> connected all the + following properties must be set. For more
> information please see the + interrupt controller device tree bindings
> documentation available at +
> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
> +
> + - interrupt-controller: Identifies the node as an interrupt
> controller. + - #interrupt-cells: Number of cells to encode an
> interrupt source, shall be 2. + - interrupt-parent: phandle of the
> parent interrupt controller. + - interrupts: Interrupt specifier for
> the controllers interrupt. +
> +
> +Please refer to gpio.txt in this directory for details of the common
> GPIO +bindings used by client devices.
> +
> +Example: PCF8575 I/O expander node
> +
> + pcf8575: gpio@20 {
> + compatible = "nxp,pcf8575";
> + reg = <0x20>;
> + interrupt-parent = <&irqpin2>;
> + interrupts = <3 0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
> index 9e61bb0..864dd8c 100644
> --- a/drivers/gpio/gpio-pcf857x.c
> +++ b/drivers/gpio/gpio-pcf857x.c
> @@ -26,6 +26,8 @@
> #include <linux/irqdomain.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> #include <linux/workqueue.h>
> @@ -50,6 +52,27 @@ static const struct i2c_device_id pcf857x_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, pcf857x_id);
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id pcf857x_of_table[] = {
> + { .compatible = "nxp,pcf8574" },
> + { .compatible = "nxp,pcf8574a" },
> + { .compatible = "nxp,pca8574" },
> + { .compatible = "nxp,pca9670" },
> + { .compatible = "nxp,pca9672" },
> + { .compatible = "nxp,pca9674" },
> + { .compatible = "nxp,pcf8575" },
> + { .compatible = "nxp,pca8575" },
> + { .compatible = "nxp,pca9671" },
> + { .compatible = "nxp,pca9673" },
> + { .compatible = "nxp,pca9675" },
> + { .compatible = "maxim,max7328" },
> + { .compatible = "maxim,max7329" },
> + { .compatible = "ti,tca9554" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, pcf857x_of_table);
> +#endif
> +
> /*
> * The pcf857x, pca857x, and pca967x chips only expose one read and one
> * write register. Writing a "one" bit (to match the reset state) lets
> @@ -257,14 +280,18 @@ fail:
> static int pcf857x_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> - struct pcf857x_platform_data *pdata;
> + struct pcf857x_platform_data *pdata = dev_get_platdata(&client-
>dev);
> + struct device_node *np = client->dev.of_node;
> struct pcf857x *gpio;
> + unsigned int n_latch = 0;
> int status;
>
> - pdata = dev_get_platdata(&client->dev);
> - if (!pdata) {
> + if (IS_ENABLED(CONFIG_OF) && np)
> + of_property_read_u32(np, "pins-initial-state", &n_latch);
I believe the convention is that platform data should be favoured, as you
can pass it even if DT is present, using auxdata table.
So this should rather be:
if (pdata)
n_latch = pdata->n_latch;
else if (IS_ENABLED(CONFIG_OF) && np)
of_property_read_u32(np, "pins-initial-state", &n_latch);
else
dev_dbg(&client->dev, "no platform data\n");
> + else if (pdata)
> + n_latch = pdata->n_latch;
> + else
> dev_dbg(&client->dev, "no platform data\n");
> - }
Other than that, the patch looks good.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
