Add mmc1 dt node to dra7-evm board. Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21) on i2c1 bus. When dt support for gpio-pcf857x is available, input supply will be modelled as cascaded regulator. Signed-off-by: Balaji T K <balajitk@xxxxxx> --- Patch has dependency on [1] for ldo1_reg [1] [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes https://lkml.org/lkml/2013/8/26/21 arch/arm/boot/dts/dra7-evm.dts | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 32f8534..a59bbd0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -251,3 +251,9 @@ pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; +}; -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
