* Zubair Lutfullah <zubair.lutfullah@xxxxxxxxx> [130715 08:33]:
> Did a grep for coordiante and replaced them all
> with coordinate.
>
> This applies to the mfd-next tree.
This should be safe to apply via the MFD tree as a non-critical
fix assuming the bootloaders are not yet using this:
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
> Signed-off-by: Zubair Lutfullah <zubair.lutfullah@xxxxxxxxx>
> ---
> .../bindings/input/touchscreen/ti-tsc-adc.txt | 4 ++--
> arch/arm/boot/dts/am335x-evm.dts | 2 +-
> drivers/input/touchscreen/ti_am335x_tsc.c | 2 +-
> drivers/mfd/ti_am335x_tscadc.c | 2 +-
> 4 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> index 491c97b..3e22aec 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
> @@ -6,7 +6,7 @@ Required properties:
> ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
> support on the platform.
> ti,x-plate-resistance: X plate resistance
> - ti,coordiante-readouts: The sequencer supports a total of 16
> + ti,coordinate-readouts: The sequencer supports a total of 16
> programmable steps each step is used to
> read a single coordinate. A single
> readout is enough but multiple reads can
> @@ -34,7 +34,7 @@ Example:
> tsc {
> ti,wires = <4>;
> ti,x-plate-resistance = <200>;
> - ti,coordiante-readouts = <5>;
> + ti,coordinate-readouts = <5>;
> ti,wire-config = <0x00 0x11 0x22 0x33>;
> };
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
> index 0fa4c7f..e50b781 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -250,7 +250,7 @@
> tsc {
> ti,wires = <4>;
> ti,x-plate-resistance = <200>;
> - ti,coordiante-readouts = <5>;
> + ti,coordinate-readouts = <5>;
> ti,wire-config = <0x00 0x11 0x22 0x33>;
> };
>
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index 0e9f02a..6422f65 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -348,7 +348,7 @@ static int titsc_parse_dt(struct platform_device *pdev,
> if (err < 0)
> return err;
>
> - err = of_property_read_u32(node, "ti,coordiante-readouts",
> + err = of_property_read_u32(node, "ti,coordinate-readouts",
> &ts_dev->coordinate_readouts);
> if (err < 0)
> return err;
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index b003a16..dd31e23 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -106,7 +106,7 @@ static int ti_tscadc_probe(struct platform_device *pdev)
>
> node = of_get_child_by_name(pdev->dev.of_node, "tsc");
> of_property_read_u32(node, "ti,wires", &tsc_wires);
> - of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
> + of_property_read_u32(node, "ti,coordinate-readouts", &readouts);
>
> node = of_get_child_by_name(pdev->dev.of_node, "adc");
> of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
