>Hi Jianpeng Ma,
>
>On 8/1/2013 10:18 AM, majianpeng wrote:
>> We found a problem when we removed a working sd card that the irqaction
>> of omap_hsmmc can sleep to 3.6s. This cause our watchdog to work.
>> In func omap_hsmmc_reset_controller_fsm, it should watch a 0->1
>> transition.It used loops_per_jiffy as the timer.
>> The code is:
>>> while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>>> && (i++ < limit))
>>> cpu_relax();
>> But the loops_per_jiffy is:
>>> while(i++ < limit)
>>> cpu_relax();
>> It add some codes so the time became long.
>> Becasue those codes in ISR context, it can't use timer_before/after.
>> I divived the time into 1ms and used udelay(1) to instead.
>> It will cause do additional udelay(1).But from my test,it looks good.
>>
>> Reported-by: Yuzheng Ma <mayuzheng@xxxxxxxxxxx>
>> Tested-by: Yuzheng Ma <mayuzheng@xxxxxxxxxxx>
>> Signed-off-by: Jianpeng Ma <majianpeng@xxxxxxxxx>
>> ---
>> drivers/mmc/host/omap_hsmmc.c | 20 +++++++++++++-------
>> 1 file changed, 13 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
>> index 1865321..96daca1 100644
>> --- a/drivers/mmc/host/omap_hsmmc.c
>> +++ b/drivers/mmc/host/omap_hsmmc.c
>> @@ -977,6 +977,8 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
>> unsigned long limit = (loops_per_jiffy *
>> msecs_to_jiffies(MMC_TIMEOUT_MS));
>>
>> + /*Divided time into us for unit 1,we can use udelay(1)*/
>> + i = limit / (MMC_TIMEOUT_MS * 1000);
>
>'limit' is a number of loops, which you now divide by 20,000?
>
>To get uS, you could just change:
>
>- unsigned long limit = (loops_per_jiffy *
>- msecs_to_jiffies(MMC_TIMEOUT_MS));
>+ unsigned long limit = 1000 * MMC_TIMEOUT_MS;
>
Yes, you are right.
>and make this amount of loops using udelay().
>
>> OMAP_HSMMC_WRITE(host->base, SYSCTL,
>> OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
>>
>> @@ -985,15 +987,19 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
>> * Monitor a 0->1 transition first
>> */
>> if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
>> - while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>> - && (i++ < limit))
>> - cpu_relax();
>
>I still don't see why any of these loops could last 3.6 seconds?
>Yes the __raw_readl() will add some time, but so much?
>I'd like to see which value you get for 'limit' on your machine
>Would PM play a role? Or cpu-freq, and 'loops_per_jiffy' isn't updated
>on time?
>From my test, i found it don't monitor a 0->1 transtion.That is the last result is 'i = limit'.
The later while opertion stop also because 'i = limit'.
The basic reason is the hardware.
It write bit and monitor 1-->0---1>---0.But we start monitor we only got 0 and the value don't change.
Maybe the transition is 1-->0.So the monitor can't work but still waste cpu.
>
>> + while (i--) {
>> + if ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>> + break;
>> + udelay(1);
>
>In earlier threads, the use of udelay was disliked because it's a waste
>of cpu cycles. The desired bit in SYSCTL will change, while udelay()
>is still making many useless loops.
Yes, but it at most wast 1us.
Jianpeng Ma
>
>> + }
>> }
>> - i = 0;
>>
>> - while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
>> - (i++ < limit))
>> - cpu_relax();
>> + i = limit / (MMC_TIMEOUT_MS * 1000);
>> + while (i--) {
>> + if (!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>> + break;
>> + udealy(1);
>> + }
>>
>> if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
>> dev_err(mmc_dev(host->mmc),
>Hein
Thanks!
Jianpeng Ma
>Hi Jianpeng Ma,
>
>On 8/1/2013 10:18 AM, majianpeng wrote:
>> We found a problem when we removed a working sd card that the irqaction
>> of omap_hsmmc can sleep to 3.6s. This cause our watchdog to work.
>> In func omap_hsmmc_reset_controller_fsm, it should watch a 0->1
>> transition.It used loops_per_jiffy as the timer.
>> The code is:
>>> while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>>> && (i++ < limit))
>>> cpu_relax();
>> But the loops_per_jiffy is:
>>> while(i++ < limit)
>>> cpu_relax();
>> It add some codes so the time became long.
>> Becasue those codes in ISR context, it can't use timer_before/after.
>> I divived the time into 1ms and used udelay(1) to instead.
>> It will cause do additional udelay(1).But from my test,it looks good.
>>
>> Reported-by: Yuzheng Ma <mayuzheng@xxxxxxxxxxx>
>> Tested-by: Yuzheng Ma <mayuzheng@xxxxxxxxxxx>
>> Signed-off-by: Jianpeng Ma <majianpeng@xxxxxxxxx>
>> ---
>> drivers/mmc/host/omap_hsmmc.c | 20 +++++++++++++-------
>> 1 file changed, 13 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
>> index 1865321..96daca1 100644
>> --- a/drivers/mmc/host/omap_hsmmc.c
>> +++ b/drivers/mmc/host/omap_hsmmc.c
>> @@ -977,6 +977,8 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
>> unsigned long limit = (loops_per_jiffy *
>> msecs_to_jiffies(MMC_TIMEOUT_MS));
>>
>> + /*Divided time into us for unit 1,we can use udelay(1)*/
>> + i = limit / (MMC_TIMEOUT_MS * 1000);
>
>'limit' is a number of loops, which you now divide by 20,000?
>
>To get uS, you could just change:
>
>- unsigned long limit = (loops_per_jiffy *
>- msecs_to_jiffies(MMC_TIMEOUT_MS));
>+ unsigned long limit = 1000 * MMC_TIMEOUT_MS;
>
>and make this amount of loops using udelay().
>
>> OMAP_HSMMC_WRITE(host->base, SYSCTL,
>> OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
>>
>> @@ -985,15 +987,19 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
>> * Monitor a 0->1 transition first
>> */
>> if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
>> - while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>> - && (i++ < limit))
>> - cpu_relax();
>
>I still don't see why any of these loops could last 3.6 seconds?
>Yes the __raw_readl() will add some time, but so much?
>I'd like to see which value you get for 'limit' on your machine
>Would PM play a role? Or cpu-freq, and 'loops_per_jiffy' isn't updated
>on time?
>
>> + while (i--) {
>> + if ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>> + break;
>> + udelay(1);
>
>In earlier threads, the use of udelay was disliked because it's a waste
>of cpu cycles. The desired bit in SYSCTL will change, while udelay()
>is still making many useless loops.
>
>> + }
>> }
>> - i = 0;
>>
>> - while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
>> - (i++ < limit))
>> - cpu_relax();
>> + i = limit / (MMC_TIMEOUT_MS * 1000);
>> + while (i--) {
>> + if (!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
>> + break;
>> + udealy(1);
>> + }
>>
>> if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
>> dev_err(mmc_dev(host->mmc),
>Hein?韬{.n?????%??檩??w?{.n???{炳??Ф?塄}?财??j:+v?? ? ???2??璀??摺?囤??z夸z罐?+?????w棹f
