On 07/23/2013 02:20 AM, Tero Kristo wrote:
Some devices require their clocks to be available with a specific
dev-id con-id mapping. With DT, the clocks can be found by default
only with their name, or alternatively through the device node of
the consumer. With drivers, that don't support DT fully yet, add
mechanism to register specific clock names.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
with this, should it not be enough to add clocks=<&phandle>
I am not sure I understand what specific drivers should need to carry
this "old hack" forward. More importantly, why is it preferable to carry
the hack forward rather than fixing the drivers.
---
drivers/clk/omap/clk.c | 39 +++++++++++++++++++++++++++++++++++++++
include/linux/clk/omap.h | 17 +++++++++++++++++
2 files changed, 56 insertions(+)
diff --git a/drivers/clk/omap/clk.c b/drivers/clk/omap/clk.c
index 1dafdaa..cd31a81 100644
--- a/drivers/clk/omap/clk.c
+++ b/drivers/clk/omap/clk.c
@@ -32,6 +32,45 @@ static const struct of_device_id clk_match[] = {
{},
};
+ /**
+ * omap_dt_clocks_register - register DT duplicate clocks during boot
+ * @oclks: list of clocks to register
+ * @cnt: number of clocks
+ *
+ * Register duplicate or non-standard DT clock entries during boot. By
+ * default, DT clocks are found based on their node name. If any
+ * additional con-id / dev-id -> clock mapping is required, use this
+ * function to list these.
+ */
+void __init omap_dt_clocks_register(struct omap_dt_clk oclks[], int cnt)
Cant we use a NULL terminated array? then we dont need to pass cnt.
+{
+ struct omap_dt_clk *c;
+ struct device_node *n;
+ struct clk *clk;
+ struct of_phandle_args clkspec;
+
+ for (c = oclks; c < oclks + cnt; c++) {
+ n = of_find_node_by_name(NULL, c->node_name);
+
+ if (!n) {
+ pr_err("%s: %s not found!\n", __func__, c->node_name);
+ continue;
+ }
+
+ clkspec.np = n;
+
+ clk = of_clk_get_from_provider(&clkspec);
+
+ if (!clk) {
+ pr_err("%s: %s has no clock!\n", __func__,
+ c->node_name);
+ continue;
+ }
+ c->lk.clk = clk;
+ clkdev_add(&c->lk);
why not clk_add_alias ?
+ }
+}
+
/* FIXME - need to initialize early; skip real driver registration & probe */
int __init dt_omap_clk_init(void)
{
diff --git a/include/linux/clk/omap.h b/include/linux/clk/omap.h
index cba892a..c39e775 100644
--- a/include/linux/clk/omap.h
+++ b/include/linux/clk/omap.h
@@ -19,6 +19,8 @@
#ifndef __LINUX_CLK_OMAP_H_
#define __LINUX_CLK_OMAP_H_
+#include <linux/clkdev.h>
+
/**
* struct dpll_data - DPLL registers and integration data
* @mult_div1_reg: register containing the DPLL M and N bitfields
@@ -146,6 +148,20 @@ struct clk_hw_omap_ops {
void (*deny_idle)(struct clk_hw_omap *oclk);
};
+struct omap_dt_clk {
+ struct clk_lookup lk;
+ const char *node_name;
+};
+
documentation missing.
+#define DT_CLK(dev, con, name) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ }, \
+ .node_name = name, \
+ }
+
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
@@ -174,6 +190,7 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
/* DT functions */
int dt_omap_clk_init(void);
+extern void omap_dt_clocks_register(struct omap_dt_clk *oclks, int cnt);
do you need the extern?
void of_omap4_dpll_setup(struct device_node *node);
#endif
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
