From: R Sricharan <r.sricharan@xxxxxx> The PRCM and MPUSS parts of DRA7 devices are quite identical to OMAP5 so as to reuse all the existing infrastructure around it. Makefile updates to do just that. Signed-off-by: R Sricharan <r.sricharan@xxxxxx> Signed-off-by: Rajendra Nayak <rnayak@xxxxxx> --- arch/arm/mach-omap2/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index d4f6715..17fb8b7 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o @@ -39,6 +40,7 @@ omap-4-5-common = omap4-common.o omap-wakeupgen.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) sleep44xx.o obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-common) $(smp-y) sleep44xx.o obj-$(CONFIG_SOC_AM43XX) += $(omap-4-5-common) +obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-common) $(smp-y) plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec) @@ -87,6 +89,7 @@ obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o +obj-$(CONFIG_SOC_DRA7XX) += omap-mpuss-lowpower.o obj-$(CONFIG_PM_DEBUG) += pm-debug.o obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o @@ -114,6 +117,7 @@ omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \ vc44xx_data.o vp44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-prcm-4-5-common) +obj-$(CONFIG_SOC_DRA7XX) += $(omap-prcm-4-5-common) # OMAP voltage domains voltagedomain-common := voltage.o vc.o vp.o @@ -143,6 +147,7 @@ obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o obj-$(CONFIG_SOC_AM43XX) += $(powerdomain-common) obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) obj-$(CONFIG_SOC_OMAP5) += powerdomains54xx_data.o +obj-$(CONFIG_SOC_DRA7XX) += $(powerdomain-common) # PRCM clockdomain control clockdomain-common += clockdomain.o @@ -160,6 +165,7 @@ obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o obj-$(CONFIG_SOC_AM43XX) += $(clockdomain-common) obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) obj-$(CONFIG_SOC_OMAP5) += clockdomains54xx_data.o +obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common) # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o @@ -181,6 +187,8 @@ obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o obj-$(CONFIG_SOC_AM33XX) += cclock33xx_data.o obj-$(CONFIG_SOC_OMAP5) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o +obj-$(CONFIG_SOC_DRA7XX) += $(clock-common) +obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
