Hello,
2013/7/3 Sourav Poddar <sourav.poddar@xxxxxx>:
> From: Mona Anonuevo <manonuevo@xxxxxxxxxx>
>
> This patch adds support for a generic spinand framework(spinand_mtd.c).
> This frameowrk can be used for other spi based flash devices. The idea
> is to have a common model under drivers/mtd, as also present for other non spi
> devices(there is a generic framework and device part simply attaches itself to it.)
Resending my comments since your previous submissino
>
> Signed-off-by: Mona Anonuevo <manonuevo@xxxxxxxxxx>
> Signed-off-by: Tuan Nguyen <tqnguyen@xxxxxxxxxx>
> Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx>
> ----
>
[snip]
> +if MTD_SPINAND
> +
> +config MTD_SPINAND_ONDIEECC
> + bool "Use SPINAND internal ECC"
> + help
> + Internel ECC
> +
> +config MTD_SPINAND_SWECC
> + bool "Use software ECC"
> + depends on MTD_NAND
> + help
> + software ECC
Can this somehow be made a runtime thing?
[snip]
> + if (count < oob_num && ops->oobbuf && chip->oobbuf) {
> + int size;
> + int offset, len, temp;
> +
> + /* repack spare to oob */
> + memset(chip->oobbuf, 0, info->ecclayout->oobavail);
> +
> + temp = 0;
> + offset = info->ecclayout->oobfree[0].offset;
> + len = info->ecclayout->oobfree[0].length;
> + memcpy(chip->oobbuf + temp,
> + chip->buf + info->page_main_size + offset, len);
Sounds like a for look might be useful here
> +
> + temp += len;
> + offset = info->ecclayout->oobfree[1].offset;
> + len = info->ecclayout->oobfree[1].length;
> + memcpy(chip->oobbuf + temp,
> + chip->buf + info->page_main_size + offset, len);
> +
> + temp += len;
> + offset = info->ecclayout->oobfree[2].offset;
> + len = info->ecclayout->oobfree[2].length;
> + memcpy(chip->oobbuf + temp,
> + chip->buf + info->page_main_size + offset, len);
> +
> + temp += len;
> + offset = info->ecclayout->oobfree[3].offset;
> + len = info->ecclayout->oobfree[3].length;
> + memcpy(chip->oobbuf + temp,
> + chip->buf + info->page_main_size + offset, len);
> +
[snip]
> + /* repack oob to spare */
> + temp = 0;
> + offset = info->ecclayout->oobfree[0].offset;
> + len = info->ecclayout->oobfree[0].length;
> + memcpy(chip->buf + info->page_main_size + offset,
> + chip->oobbuf + temp, len);
And here too.
> +
> + temp += len;
> + offset = info->ecclayout->oobfree[1].offset;
> + len = info->ecclayout->oobfree[1].length;
> + memcpy(chip->buf + info->page_main_size + offset,
> + chip->oobbuf + temp, len);
> +
> + temp += len;
> + offset = info->ecclayout->oobfree[2].offset;
> + len = info->ecclayout->oobfree[2].length;
> + memcpy(chip->buf + info->page_main_size + offset,
> + chip->oobbuf + temp, len);
> +
> + temp += len;
> + offset = info->ecclayout->oobfree[3].offset;
> + len = info->ecclayout->oobfree[3].length;
> + memcpy(chip->buf + info->page_main_size + offset,
> + chip->oobbuf + temp, len);
> + }
[snip]
> +++ b/include/linux/mtd/spinand.h
> @@ -0,0 +1,155 @@
> +/*
> + * linux/include/linux/mtd/spinand.h
> + * Copyright (c) 2009-2010 Micron Technology, Inc.
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> +
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> +/bin/bash: 4: command not found
> + *
> + * based on nand.h
> + */
> +#ifndef __LINUX_MTD_SPI_NAND_H
> +#define __LINUX_MTD_SPI_NAND_H
> +
> +#include <linux/wait.h>
> +#include <linux/spinlock.h>
> +#include <linux/mtd/mtd.h>
> +
> +/* cmd */
> +#define CMD_READ 0x13
> +#define CMD_READ_RDM 0x03
> +#define CMD_PROG_PAGE_CLRCACHE 0x02
> +#define CMD_PROG_PAGE 0x84
> +#define CMD_PROG_PAGE_EXC 0x10
> +#define CMD_ERASE_BLK 0xd8
> +#define CMD_WR_ENABLE 0x06
> +#define CMD_WR_DISABLE 0x04
> +#define CMD_READ_ID 0x9f
> +#define CMD_RESET 0xff
> +#define CMD_READ_REG 0x0f
> +#define CMD_WRITE_REG 0x1f
Can we somehow namespace these defines so they are not so generic?
Something like SPI_NAND_CMD_READ would be just fine I guess.
> +
> +/* feature/ status reg */
> +#define REG_BLOCK_LOCK 0xa0
> +#define REG_OTP 0xb0
> +#define REG_STATUS 0xc0/* timing */
> +
> +/* status */
> +#define STATUS_OIP_MASK 0x01
> +#define STATUS_READY (0 << 0)
> +#define STATUS_BUSY (1 << 0)
> +
> +#define STATUS_E_FAIL_MASK 0x04
> +#define STATUS_E_FAIL (1 << 2)
> +
> +#define STATUS_P_FAIL_MASK 0x08
> +#define STATUS_P_FAIL (1 << 3)
> +
> +#define STATUS_ECC_MASK 0x30
> +#define STATUS_ECC_1BIT_CORRECTED (1 << 4)
> +#define STATUS_ECC_ERROR (2 << 4)
> +#define STATUS_ECC_RESERVED (3 << 4)
> +
> +
> +/*ECC enable defines*/
> +#define OTP_ECC_MASK 0x10
> +#define OTP_ECC_OFF 0
> +#define OTP_ECC_ON 1
> +
> +#define ECC_DISABLED
> +#define ECC_IN_NAND
> +#define ECC_SOFT
> +
> +/* block lock */
> +#define BL_ALL_LOCKED 0x38
> +#define BL_1_2_LOCKED 0x30
> +#define BL_1_4_LOCKED 0x28
> +#define BL_1_8_LOCKED 0x20
> +#define BL_1_16_LOCKED 0x18
> +#define BL_1_32_LOCKED 0x10
> +#define BL_1_64_LOCKED 0x08
> +#define BL_ALL_UNLOCKED 0
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
