2013/6/20 Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>:
> The IGEP COM MOdule has a GPIO LED connected to OMAP
> pins. Configure this pin as output GPIO.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/omap3-igep0030.dts | 9 +++++++++
> 1 files changed, 9 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
> index 644d053..eee3c63 100644
> --- a/arch/arm/boot/dts/omap3-igep0030.dts
> +++ b/arch/arm/boot/dts/omap3-igep0030.dts
> @@ -16,7 +16,10 @@
> compatible = "isee,omap3-igep0030", "ti,omap3";
>
> leds {
> + pinctrl-names = "default";
> + pinctrl-0 = <&leds_pins>;
> compatible = "gpio-leds";
> +
> boot {
> label = "omap3:green:boot";
> gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
> @@ -43,6 +46,12 @@
> };
> };
>
> +&leds_pins {
> + pinctrl-single,pins = <
> + 0x5b0 (PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
> + >;
> +};
> +
> &gpmc {
> ranges = <0 0 0x00000000 0x20000000>;
>
> --
> 1.7.7.6
>
Tested-by: Enric Balletbo i Serra <eballetbo@xxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
