On Tuesday 25 June 2013 07:02 PM, Nishanth Menon wrote: > On 18:43-20130625, Santosh Shilimkar wrote: >> On Tuesday 25 June 2013 06:36 PM, Nishanth Menon wrote: >>> On 16:59-20130625, Santosh Shilimkar wrote: >>>> On Tuesday 25 June 2013 04:56 PM, Kevin Hilman wrote: >>>>> Santosh Shilimkar <santosh.shilimkar@xxxxxx> writes: >>>>> >>>>>> On Tuesday 25 June 2013 04:17 PM, Nishanth Menon wrote: >>>>>>> On Tue, Jun 25, 2013 at 3:12 PM, Santosh Shilimkar >>>>>>> <santosh.shilimkar@xxxxxx> wrote: >>>>>>>> >>>>>>>> Well having voltage data in voltage domain was not my decision ;-) >>>>>>>> Instead of creating another set of dummy data, I just used what >>>>>>>> is out there(OMAP4) with clear comment that data needs to be updated. >>>>>>>> I don't see any problem in this considering we have devices booting >>>>>>>> and working nicely for OMAP5 >>>>>>> I really wish the OMAP5 devices(the latest ones from Fab) I have would >>>>>>> like to function at OMAP4 configurations! Unfortunately the devices >>>>>>> tend to follow the data manual for OMAP5. >>>>>>> *if* there is no need for it to boot, I suggest removing it. >>>>>>> >>>>>> I don't understand you. For OMAP5, that data without voltage >>>>>> controller support doesn't do anything bad. Since there was some >>>>>> dependency of voltage domain association whit PD's, I have to keep >>>>>> that. I never claimed that OMAP4 settings would work for OMAP5 >>>>>> in absolute terms. >>>>>> >>>>>> Feel free to post a patch with right data which you seems to have. >>>>>> I don't mind you removing that data as long as the device >>>>>> continues to boot. Patch welcome. >>>>> >>>>> Thanks to Rajendra's cleanup, I don't think we need dummy data anymore: >>>>> >>>>> http://marc.info/?l=linux-omap&m=137147503827947&w=2 >>>>> >>>>> That series is queued for v3.11. >>>>> >>>> I knew the series but wasn't sure about it getting queued up >>>> for 3.11. Nice to see the dependency is getting removed. >>> >>> Anyways, I tried booting up a kernel built on linux-next-20130625 >>> with omap2plus_defconfig and [1] on OMAP5uEVM and all I see is: >>> Importing environment from mmc0 ... >>> reading //zImage >>> 4030024 bytes read in 198 ms (19.4 MiB/s) >>> reading //omap5-uevm.dtb >>> 17729 bytes read in 16 ms (1.1 MiB/s) >>> [..] >>> ## Flattened Device Tree blob at 80f80000 >>> Booting using the fdt blob at 0x80f80000 >>> Using Device Tree in place at 80f80000, end 80f87540 >>> >>> Starting kernel ... >>> >>> If someone can point me to a functional base, it'd be nice, or if there >>> is a known pending fix, it'd be better.. >>> Taking http://marc.info/?l=linux-omap&m=136984555408516&w=2 and rebasing >>> on linux next tag resulted practically in NOP. >>> >> As mentioned in the cover-letter, you are probably missing the clock data. >> ------------ >> That means for the boot, one clock data patch needs to be applied. >> It is available on my git tree in 'out_of_tree/omap5_clk_data' branch. >> --------------------------------------- > Thanks on the hint, I had missed it. I merged the > for_3.11/out_of_tree/omap5_clk_data from > git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux.git > to linux-next-20130625 with a minor conflict in arch/arm/mach-omap2/io.c > > omap2plus_defconfig: http://pastebin.com/rTuEn0H6 > Then applied: > diff --git a/arch/arm/mach-omap2/voltagedomains54xx_data.c b/arch/arm/mach-omap2/voltagedomains54xx_data.c > index 72b8971..89a5589f 100644 > --- a/arch/arm/mach-omap2/voltagedomains54xx_data.c > +++ b/arch/arm/mach-omap2/voltagedomains54xx_data.c > @@ -89,11 +89,6 @@ void __init omap54xx_voltagedomains_init(void) > * XXX Will depend on the process, validation, and binning > * for the currently-running IC. Use OMAP4 data for time being. > */ > -#ifdef CONFIG_PM_OPP > - omap5_voltdm_mpu.volt_data = omap446x_vdd_mpu_volt_data; > - omap5_voltdm_mm.volt_data = omap446x_vdd_iva_volt_data; > - omap5_voltdm_core.volt_data = omap446x_vdd_core_volt_data; > -#endif > > for (i = 0; voltdm = voltagedomains_omap5[i], voltdm; i++) > voltdm->sys_clk.name = sys_clk_name; > Result: http://pastebin.com/t8cdd7uj > > As kevin mentioned, we can boot without registering wrong voltage data. > With Rajendra's series included now, Yes. Can you send an updated patch with description for Paul to pick it up ? Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
