Hi, On Tuesday 18 June 2013 03:17 PM, Felipe Balbi wrote:
Hi, On Thu, Jun 13, 2013 at 02:13:57PM +0530, Kishon Vijay Abraham I wrote:Use the generic PHY framework API to get the PHY. The usb_phy_set_resume and usb_phy_set_suspend is replaced with power_on/get_sync and power_off/put_sync to align with the new PHY framework. musb->xceiv can't be removed as of now because musb core uses xceiv.state and xceiv.otg. Once there is a separate state machine to handle otg, these can be moved out of xceiv and then we can start using the generic PHY framework. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- drivers/usb/musb/musb_core.c | 1 + drivers/usb/musb/musb_core.h | 3 +++ drivers/usb/musb/omap2430.c | 29 +++++++++++++++++++++-------- 3 files changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 37a261a..f732bcc 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1864,6 +1864,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->board_set_power = plat->set_power; musb->min_power = plat->min_power; musb->ops = plat->platform_ops; + musb->phy_label = plat->phy_label; /* The musb_platform_init() call: * - adjusts musb->mregs diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 7fb4819..498ae21 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -46,6 +46,7 @@ #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/usb/musb.h> +#include <linux/phy/phy.h> struct musb; struct musb_hw_ep; @@ -357,6 +358,7 @@ struct musb { u16 int_tx; struct usb_phy *xceiv; + struct phy *phy; int nIrq; unsigned irq_wake:1; @@ -434,6 +436,7 @@ struct musb { unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; + const char *phy_label; #ifdef MUSB_CONFIG_PROC_FS struct proc_dir_entry *proc_entry; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 628b93f..c62a004 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -348,14 +348,24 @@ static int omap2430_musb_init(struct musb *musb) * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. */ - if (dev->parent->of_node) + if (dev->parent->of_node) { + musb->phy = devm_phy_get(dev->parent, "usb2-phy"); + + /* We can't totally remove musb->xceiv as of now because + * musb core uses xceiv.state and xceiv.otg. Once we have + * a separate state machine to handle otg, these can be moved + * out of xceiv and then we can start using the generic PHY + * framework + */ musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); - else + } else { musb->xceiv = devm_usb_get_phy_dev(dev, 0); + musb->phy = devm_phy_get(dev, musb->phy_label); + } - if (IS_ERR(musb->xceiv)) { - status = PTR_ERR(musb->xceiv); + if (IS_ERR(musb->xceiv) || IS_ERR(musb->phy)) { + status = PTR_ERR(musb->xceiv) | PTR_ERR(musb->phy); if (status == -ENXIO) return status; @@ -397,9 +407,10 @@ static int omap2430_musb_init(struct musb *musb) if (glue->status != OMAP_MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - usb_phy_init(musb->xceiv); + phy_init(musb->phy); pm_runtime_put_noidle(musb->controller); + phy_pm_runtime_put(musb->phy);see, weird unbalanced calls :-) Make it all explicit: phy_pm_runtime_get_sync(phy); phy_init(phy); phy_pm_runtime_put(phy);
I think then it makes sense to drop get_sync from phy_init()? Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
