Re: [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tony Lindgren <tony@xxxxxxxxxxx> writes:

Hi,

> * Arnaud Patard <arnaud.patard@xxxxxxxxxxx> [130619 02:52]:
>> Tony Lindgren <tony@xxxxxxxxxxx> writes:
>> 
>> Hi,
>> 
>> > * Tony Lindgren <tony@xxxxxxxxxxx> [130617 03:32]:
>> >> * Arnaud Patard <arnaud.patard@xxxxxxxxxxx> [130617 02:52]:
>> >> > Tony Lindgren <tony@xxxxxxxxxxx> writes:
>> >> > 
>> >> > I understand your concerns but, please, cope with reality: the clock
>> >> > work is not in -next so this tends to make me think it won't reach
>> >> > 3.11. We're at -rc6 after all. Telling users that their system doesn't
>> >> > have any network because it was easier to maintain, is not something
>> >> > they will understand imho.
>> >> 
>> >> Right, like I said: the idea is to have it usable with DT. And USB and
>> >> Ethernet certainly are part of what I call usable. So is MMC, WLAN and
>> >> DSS. I've certainly spent quite a bit of time on making sure panda works
>> >> with DT, and I can assure you that fixing the USB extclock is easier than
>> >> supporting the legacy boot with DT :)
>> >> 
>> >> This issue can also be fixed with a clock alias if we don't have DT
>> >> defined clocks ready for v3.11. It may take a few days for us to have
>> >> the solution. But get getting a clock to a driver certainly is not a
>> >> showstopper here. After all, that's what all drivers already do.
>> >
>> > Care to test the last patch just posted by Roger in thread
>> > " [PATCH 0/4] ARM: OMAP4: Panda USB Host support and DVI EDID fix"?
>> 
>> I tried to test them but they don't apply on linux-next due to some
>> pinctrl changes probably missing:
>> Error: arch/arm/boot/dts/omap4-panda-common.dtsi:177.14-15 syntax error
>> 
>> which corresponds to :
>> 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)
>
> Oops, right, that's in Benoit's branch too for the .dts preprocessing.
> Until it is merged, maybe try with Roger's earlier version of that patch
> that did not yet use the macros?
>  

Right. I've changed the missing macros with their values and now, it
compiles and I can even ping the board, so works for me.

Thanks,
Arnaud
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux