Till the OMAP clocks are correctly defined in device tree, use
this temporary hack to provide clock alias to the USB PHY clocks.
Without this, USB Host & Ethernet will not be functional with
device tree boots on Panda and uEVM.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
arch/arm/mach-omap2/board-generic.c | 23 ++++++++++++++++++++++-
1 files changed, 22 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 88aa6b1..7428733 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,6 +15,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
+#include <linux/clk.h>
#include <asm/mach/arch.h>
@@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
{ }
};
+/*
+ * Create alias for USB host PHY clock.
+ * Remove this when clock phandle can be provided via DT
+ */
+static void __init legacy_init_ehci_clk(char *clkname)
+{
+ int ret;
+
+ ret = clk_add_alias("main_clk", NULL, clkname, NULL);
+ if (ret) {
+ pr_err("%s:Failed to add main_clk alias to %s :%d\n",
+ __func__, clkname, ret);
+ }
+}
+
static void __init omap_generic_init(void)
{
omap_sdrc_init(NULL, NULL);
@@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
* HACK: call display setup code for selected boards to enable omapdss.
* This will be removed when omapdss supports DT.
*/
- if (of_machine_is_compatible("ti,omap4-panda"))
+ if (of_machine_is_compatible("ti,omap4-panda")) {
omap4_panda_display_init_of();
+ legacy_init_ehci_clk("auxclk3_ck");
+
+ }
else if (of_machine_is_compatible("ti,omap4-sdp"))
omap_4430sdp_display_init_of();
+ else if (of_machine_is_compatible("ti,omap5-uevm"))
+ legacy_init_ehci_clk("auxclk1_ck");
}
#ifdef CONFIG_SOC_OMAP2420
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
