* Florian Vaussard <florian.vaussard@xxxxxxx> [130521 07:01]:
> The reset GPIO should be set for the SMSC911x, otherwise the controller
> will not work and probing will fail. In the case of the tobi-duo
> expansion board, the second controller shares the same GPIO, thus no
> more changes are required (not tested).
>
> Signed-off-by: Florian Vaussard <florian.vaussard@xxxxxxx>
Thanks applying into omap-for-v3.11/board.
Regards,
Tony
> ---
> arch/arm/mach-omap2/board-overo.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> index 4ca6b68..5748b5d 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -68,6 +68,7 @@
>
> #define OVERO_SMSC911X_CS 5
> #define OVERO_SMSC911X_GPIO 176
> +#define OVERO_SMSC911X_NRESET 64
> #define OVERO_SMSC911X2_CS 4
> #define OVERO_SMSC911X2_GPIO 65
>
> @@ -122,7 +123,7 @@ static struct omap_smsc911x_platform_data smsc911x_cfg = {
> .id = 0,
> .cs = OVERO_SMSC911X_CS,
> .gpio_irq = OVERO_SMSC911X_GPIO,
> - .gpio_reset = -EINVAL,
> + .gpio_reset = OVERO_SMSC911X_NRESET,
> .flags = SMSC911X_USE_32BIT,
> };
>
> --
> 1.7.5.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
