Rajendra Nayak <rnayak@xxxxxx> writes: > Hi, > > The powerdomain framework currently expects to always have a voltagedomain > associated with a given powerdomain. We already have AM33xx which > has no Voltage Controller/Voltage Processor as part of PRCM. > There are more SoCs' to follow starting with AM437x and DRA7xx > which do not have VC/VP. All these SoCs', hence do not support any > form of auto-scaling of voltages, that was possible on earlier OMAPs' > using the VFSM to trigger an i2c communication to the PMIC automatically > on hitting a low power state. > > Instead of adding dummy voltage domain data files, like was done for the > AM33xx case, make the powerdomain framework aware of the fact that some > SoCs' might not really have support for auto-scaling of voltages in hw. > > Patches are based of 3.10-rc6 and are boot tested on am335x bone. > > Rajendra Nayak (2): > ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm > associated to a pwrdm > ARM: AM33xx: Remove the unused voltagedomain data Thanks, queuing up this series with ack from Santosh and tested-by from Afzal. I'll try, but not sure if it can make it for v3.11. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html