'clkout2' comes out on the device pad and is being used by various external on-board peripherals like, Audio codecs, Wilink and stuff. So enable the clkout2 by default during init sequence itself along with right pinmux configuration clkout2 output. Also, add the missing entry of "clkout2_ck" to the AM33xx clock table. As far as enabling of clkout2 during init is concerned, we can argue that it can be handled using DT property and enable the clock only when specified; but not until OMAP clock-tree migration to DT. Vaibhav Hiremath (2): ARM: OMAP AM33XX: clock data: Enable clkout2 as part of init ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output arch/arm/boot/dts/am335x-bone.dts | 8 +++++++- arch/arm/boot/dts/am335x-evm.dts | 8 +++++++- arch/arm/boot/dts/am335x-evmsk.dts | 8 +++++++- arch/arm/mach-omap2/cclock33xx_data.c | 2 ++ 4 files changed, 23 insertions(+), 3 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
