Hi Sourav, On Wed, Apr 10, 2013 at 15:13:44, Poddar, Sourav wrote: [...] > Yes, had a look at that and found your situation similar to UART. > > But how exactly this gets used, I mean I don't see any drivers/ in mainline > making use of this compatible string "ti,am3352-ocmcram". ? OCMC clock is enabled during bootup (not sure whether that's the h/w default or ROM does it) since the initial bootloader runs from there. By marking the corresponding hwmod with HWMOD_INIT_NO_IDLE we leave the clock running. Right now the sram code under arch/arm/plat-omap/ is what manages the OCMC. I guess this needs to move somewhere under drivers/ and start managing the clocks. Even then we'll need a mechanism to leave the clocks running as part of the kernel suspend process since the assembly code which runs at the fag end of the suspend process runs out of OCMC and hence we can't cut its clock. On AM335x, the OCMC clock is cut to have PER power domain transition but that's done in the WKUP-M3 firmware when going down. During the wakeup sequence, WKUP-M3 re-enables the OCMC clock so that when the kernel resumes the h/w state is same. Regards, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
