On 04/09/2013 07:11 AM, Javier Martinez Canillas wrote: > The GPMC timing properties for device-tree have been updated > by adding a "-ns" or "-ps" suffix to indicate the units of > time the property represents. Therefore, update the timing > property names for TI GPMC ethernet binding. > > Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> > --- > > Jon, Benoit: > > Sorry that I didn't send this patch before but I just realized > that the GPMC timing properties changed after > > commit 5330dc16 ("ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes") > > got queued. Thanks, I missed this one too. Looks like I need to update the gpmc-nand documentation as well :-( > Tony, > > Is still possible to queue this patch on your omap-for-v3.10/gpmc branch > or it is too late? If it is I think that this could be queued as a fix. Tony? > Thanks a lot and best regards, > Javier > > Documentation/devicetree/bindings/net/gpmc-eth.txt | 56 ++++++++++---------- > 1 files changed, 28 insertions(+), 28 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt > index 24cb4e4..ace4a64 100644 > --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt > +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt > @@ -26,16 +26,16 @@ Required properties: > - bank-width: Address width of the device in bytes. GPMC supports 8-bit > and 16-bit devices and so must be either 1 or 2 bytes. > - compatible: Compatible string property for the ethernet child device. > -- gpmc,cs-on: Chip-select assertion time > -- gpmc,cs-rd-off: Chip-select de-assertion time for reads > -- gpmc,cs-wr-off: Chip-select de-assertion time for writes > -- gpmc,oe-on: Output-enable assertion time > -- gpmc,oe-off Output-enable de-assertion time > -- gpmc,we-on: Write-enable assertion time > -- gpmc,we-off: Write-enable de-assertion time > -- gpmc,access: Start cycle to first data capture (read access) > -- gpmc,rd-cycle: Total read cycle time > -- gpmc,wr-cycle: Total write cycle time > +- gpmc,cs-on-ns: Chip-select assertion time > +- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads > +- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes > +- gpmc,oe-on-ns: Output-enable assertion time > +- gpmc,oe-off-ns: Output-enable de-assertion time > +- gpmc,we-on-ns: Write-enable assertion time > +- gpmc,we-off-ns: Write-enable de-assertion time > +- gpmc,access-ns: Start cycle to first data capture (read access) > +- gpmc,rd-cycle-ns: Total read cycle time > +- gpmc,wr-cycle-ns: Total write cycle time > - reg: Chip-select, base address (relative to chip-select) > and size of the memory mapped for the device. > Note that base address will be typically 0 as this > @@ -65,24 +65,24 @@ gpmc: gpmc@6e000000 { > bank-width = <2>; > > gpmc,mux-add-data; > - gpmc,cs-on = <0>; > - gpmc,cs-rd-off = <186>; > - gpmc,cs-wr-off = <186>; > - gpmc,adv-on = <12>; > - gpmc,adv-rd-off = <48>; > - gpmc,adv-wr-off = <48>; > - gpmc,oe-on = <54>; > - gpmc,oe-off = <168>; > - gpmc,we-on = <54>; > - gpmc,we-off = <168>; > - gpmc,rd-cycle = <186>; > - gpmc,wr-cycle = <186>; > - gpmc,access = <114>; > - gpmc,page-burst-access = <6>; > - gpmc,bus-turnaround = <12>; > - gpmc,cycle2cycle-delay = <18>; > - gpmc,wr-data-mux-bus = <90>; > - gpmc,wr-access = <186>; > + gpmc,cs-on-ns = <0>; > + gpmc,cs-rd-off-ns = <186>; > + gpmc,cs-wr-off-ns = <186>; > + gpmc,adv-on-ns = <12>; > + gpmc,adv-rd-off-ns = <48>; > + gpmc,adv-wr-off-ns = <48>; > + gpmc,oe-on-ns = <54>; > + gpmc,oe-off-ns = <168>; > + gpmc,we-on-ns = <54>; > + gpmc,we-off-ns = <168>; > + gpmc,rd-cycle-ns = <186>; > + gpmc,wr-cycle-ns = <186>; > + gpmc,access-ns = <114>; > + gpmc,page-burst-access-ns = <6>; > + gpmc,bus-turnaround-ns = <12>; > + gpmc,cycle2cycle-delay-ns = <18>; > + gpmc,wr-data-mux-bus-ns = <90>; > + gpmc,wr-access-ns = <186>; > gpmc,cycle2cycle-samecsen; > gpmc,cycle2cycle-diffcsen; Acked-by: Jon Hunter <jon-hunter@xxxxxx> Cheers Jon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html