* Ruslan Bilovol <ruslan.bilovol@xxxxxx> [130313 17:16]: > This patch adds missing CONTROL_SMART2IO_PADCONF_2 register > definition Sorry for the delay on this one. After looking at these registers, there's no need to define them here. These all relate to pinconf, and these all can now be handled by generic pinconf using pinctrl-single.c. There's generic pinconf support added to pinctrl-single.c in linux next by Haojian Zhuang. This means that you can just define these in the .dts file for the board, and you can select the board specific values for things like output buffer. In Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt you should see what all is already supported, and if it's not, we can patch it in. That's in current linux next queued for v3.10. Regards, Tony > Signed-off-by: Ruslan Bilovol <ruslan.bilovol@xxxxxx> > --- > arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h | 45 +++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h > index c88420d..d512ade 100644 > --- a/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h > +++ b/arch/arm/mach-omap2/ctrl_module_pad_core_44xx.h > @@ -46,6 +46,7 @@ > #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0 > #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4 > #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8 > +#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_2 0x05cc > #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600 > #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604 > #define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608 > @@ -764,6 +765,50 @@ > #define OMAP4_HSI_DR0_LB_SHIFT 10 > #define OMAP4_HSI_DR0_LB_MASK (1 << 10) > > +/* CONTROL_SMART2IO_PADCONF_2 */ > +#define OMAP4_DPM_DR1_DS_SHIFT 31 > +#define OMAP4_DPM_DR1_DS_MASK (1 << 31) > +#define OMAP4_DPM_DR2_DS_SHIFT 30 > +#define OMAP4_DPM_DR2_DS_MASK (1 << 30) > +#define OMAP4_DPM_DR3_DS_SHIFT 29 > +#define OMAP4_DPM_DR3_DS_MASK (1 << 29) > +#define OMAP4_GPIO_DR10_DS_SHIFT 28 > +#define OMAP4_GPIO_DR10_DS_MASK (1 << 28) > +#define OMAP4_HSI2_DR0_DS_SHIFT 27 > +#define OMAP4_HSI2_DR0_DS_MASK (1 << 27) > +#define OMAP4_HSI2_DR1_DS_SHIFT 26 > +#define OMAP4_HSI2_DR1_DS_MASK (1 << 26) > +#define OMAP4_HSI2_DR2_DS_SHIFT 25 > +#define OMAP4_HSI2_DR2_DS_MASK (1 << 25) > +#define OMAP4_SDMMC3_DR0_DS_SHIFT 24 > +#define OMAP4_SDMMC3_DR0_DS_MASK (1 << 24) > +#define OMAP4_SDMMC4_DR0_DS_SHIFT 23 > +#define OMAP4_SDMMC4_DR0_DS_MASK (1 << 23) > +#define OMAP4_SDMMC4_DR1_DS_SHIFT 22 > +#define OMAP4_SDMMC4_DR1_DS_MASK (1 << 22) > +#define OMAP4_SPI3_DR0_DS_SHIFT 21 > +#define OMAP4_SPI3_DR0_DS_MASK (1 << 21) > +#define OMAP4_SPI3_DR1_DS_SHIFT 20 > +#define OMAP4_SPI3_DR1_DS_MASK (1 << 20) > +#define OMAP4_UART3_DR2_DS_SHIFT 19 > +#define OMAP4_UART3_DR2_DS_MASK (1 << 19) > +#define OMAP4_UART3_DR3_DS_SHIFT 18 > +#define OMAP4_UART3_DR3_DS_MASK (1 << 18) > +#define OMAP4_UART3_DR4_DS_SHIFT 17 > +#define OMAP4_UART3_DR4_DS_MASK (1 << 17) > +#define OMAP4_UART3_DR5_DS_SHIFT 16 > +#define OMAP4_UART3_DR5_DS_MASK (1 << 16) > +#define OMAP4_USBA0_DR0_DS_SHIFT 15 > +#define OMAP4_USBA0_DR0_DS_MASK (1 << 15) > +#define OMAP4_USBA0_DR1_DS_SHIFT 14 > +#define OMAP4_USBA0_DR1_DS_MASK (1 << 14) > +#define OMAP4_USBA_DR2_DS_SHIFT 13 > +#define OMAP4_USBA_DR2_DS_MASK (1 << 13) > +#define OMAP4_USBB2_DR0_DS_SHIFT 12 > +#define OMAP4_USBB2_DR0_DS_MASK (1 << 12) > +#define OMAP4_USBB1_DR0_DS_SHIFT 11 > +#define OMAP4_USBB1_DR0_DS_MASK (1 << 11) > + > /* CONTROL_USBB_HSIC */ > #define OMAP4_USBB2_DR1_SR_SHIFT 30 > #define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30) > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
