Main change is ensuring that the state of a gpio bank is restored when booting with device-tree. The rest of the patches are clean-ups and one optimisation. The patch modifying the *.dtsi files should go via Benoit Cousson's for_3.10/dts branch [1] as it is dependent on changes in his branch but I have included here for completeness. Testing includes: - Boot testing on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP, OMAP4430 SDP and AM335x EVM. - Verified that GPIO interrupts are working on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP and OMAP4430 SDP by making sure networking was working correctly as these boards use a GPIO with the ethernet chips. Also checked /proc/interrupts to ensure GPIO interrupt counts are incrementing as expected. [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git Jon Hunter (4): gpio/omap: free irq domain in probe() failure paths gpio/omap: optimise interrupt service routine gpio/omap: force restore if context loss is not detectable ARM: dts: OMAP2+: Identify GPIO banks that are always powered Tarun Kanti DebBarma (1): gpio/omap: remove extra context restores in *_runtime_resume() .../devicetree/bindings/gpio/gpio-omap.txt | 7 ++- arch/arm/boot/dts/omap2420.dtsi | 4 ++ arch/arm/boot/dts/omap2430.dtsi | 4 ++ arch/arm/boot/dts/omap3.dtsi | 1 + arch/arm/boot/dts/omap4.dtsi | 1 + arch/arm/boot/dts/omap5.dtsi | 1 + drivers/gpio/gpio-omap.c | 49 +++++++++++--------- 7 files changed, 44 insertions(+), 23 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
