[PATCH v3 2/4] ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This helper allows board support code to add the PHY's
VCC and RESET regulators which are GPIO controlled as well
as the NOP PHY device.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
 arch/arm/mach-omap2/usb-host.c |  177 +++++++++++++++++++++++++++++++++++++++-
 arch/arm/mach-omap2/usb.h      |    9 ++
 2 files changed, 184 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 5706bdc..49a2c3f 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -22,8 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
-
-#include <asm/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/phy.h>
 
 #include "soc.h"
 #include "omap_device.h"
@@ -526,3 +530,172 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
 }
 
 #endif
+
+/* Template for PHY regulators */
+static struct regulator_consumer_supply hsusb_reg_supplies[] = {
+	{ /* .supply & .dev_name filled later */ },
+};
+
+static struct regulator_init_data hsusb_reg_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies	= hsusb_reg_supplies,
+	.num_consumer_supplies	= ARRAY_SIZE(hsusb_reg_supplies),
+};
+
+static struct fixed_voltage_config hsusb_reg_config = {
+	/* .supply_name filled later */
+	.microvolts = 3300000,
+	.gpio = -1,		/* updated later */
+	.startup_delay = 70000, /* 70msec */
+	.enable_high = 1,	/* updated later */
+	.enabled_at_boot = 0,	/* keep in RESET */
+	/* .init_data filled later */
+};
+
+static struct platform_device_info hsusb_reg_pdev_info = {
+	.name	= "reg-fixed-voltage",
+	.id	= PLATFORM_DEVID_AUTO,
+};
+
+static const char *reset_supply = "reset";
+static const char *vcc_supply = "vcc";
+static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
+
+int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
+{
+	struct regulator_consumer_supply *supplies;
+	struct regulator_init_data *reg_data;
+	struct fixed_voltage_config *config;
+	char *supply_name;
+	int i, len;
+	struct platform_device *pdev;
+	char *phy_id;
+
+	/* the phy_id will be something like "nop_usb_xceiv.1" */
+	len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+
+	for (i = 0; i < num_phys; i++) {
+
+		if (!phy->port) {
+			pr_err("%s: Invalid port 0. Must start from 1\n",
+						__func__);
+			continue;
+		}
+
+		/* do we need a NOP PHY device ? */
+		if (!gpio_is_valid(phy->reset_gpio) &&
+			!gpio_is_valid(phy->vcc_gpio))
+			continue;
+
+		/* create a NOP PHY device */
+		pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+		if (!pdev)
+			return -ENOMEM;
+
+		pdev->id = phy->port;
+		pdev->name = nop_name;
+		pdev->dev.platform_data = phy->platform_data;
+
+		phy_id = kmalloc(len, GFP_KERNEL);
+		if (!phy_id)
+			return -ENOMEM;
+
+		scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
+					pdev->id);
+
+		if (platform_device_register(pdev)) {
+			pr_err("%s: Failed to register device %s\n",
+				__func__,  phy_id);
+			continue;
+		}
+
+		usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
+
+		/* Do we need RESET regulator ? */
+		if (!gpio_is_valid(phy->reset_gpio))
+			goto check_vcc;
+
+		supplies = kmemdup(hsusb_reg_supplies,
+			    ARRAY_SIZE(hsusb_reg_supplies) *
+			    sizeof(struct regulator_consumer_supply),
+			    GFP_KERNEL);
+		if (!supplies)
+			return -ENOMEM;
+
+		supplies->supply = reset_supply;
+		supplies->dev_name = phy_id;
+
+		reg_data = kmemdup(&hsusb_reg_data, sizeof(hsusb_reg_data),
+							GFP_KERNEL);
+		if (!reg_data)
+			return -ENOMEM;
+
+		reg_data->consumer_supplies = supplies;
+
+		config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+							GFP_KERNEL);
+		if (!config)
+			return -ENOMEM;
+
+		supply_name = kmalloc(13, GFP_KERNEL);
+		if (!supply_name)
+			return -ENOMEM;
+
+		scnprintf(supply_name, 13, "hsusb%d_reset", phy->port);
+		config->supply_name = supply_name;
+		config->gpio = phy->reset_gpio;
+		config->init_data = reg_data;
+
+		hsusb_reg_pdev_info.data = config;
+		hsusb_reg_pdev_info.size_data = sizeof(hsusb_reg_config);
+		platform_device_register_full(&hsusb_reg_pdev_info);
+
+check_vcc:
+		/* Do we need VCC regulator? */
+		if (!gpio_is_valid(phy->vcc_gpio))
+			goto next;
+
+		supplies = kmemdup(hsusb_reg_supplies,
+			    ARRAY_SIZE(hsusb_reg_supplies) *
+			    sizeof(struct regulator_consumer_supply),
+			    GFP_KERNEL);
+		if (!supplies)
+			return -ENOMEM;
+
+		supplies->supply = vcc_supply;
+		supplies->dev_name = phy_id;
+
+		reg_data = kmemdup(&hsusb_reg_data, sizeof(hsusb_reg_data),
+							GFP_KERNEL);
+		if (!reg_data)
+			return -ENOMEM;
+
+		reg_data->consumer_supplies = supplies;
+
+		config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+							GFP_KERNEL);
+		if (!config)
+			return -ENOMEM;
+
+		supply_name = kmalloc(13, GFP_KERNEL);
+		if (!supply_name)
+			return -ENOMEM;
+
+		scnprintf(supply_name, 13, "hsusb%d_vcc", phy->port);
+		config->supply_name = supply_name;
+		config->gpio = phy->vcc_gpio;
+		config->enable_high = phy->vcc_polarity;
+		config->init_data = reg_data;
+
+		hsusb_reg_pdev_info.data = config;
+		hsusb_reg_pdev_info.size_data = sizeof(hsusb_reg_config);
+		platform_device_register_full(&hsusb_reg_pdev_info);
+
+next:
+		phy++;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index 3319f5c..e7261eb 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -53,8 +53,17 @@
 #define USBPHY_OTGSESSEND_EN	(1 << 20)
 #define USBPHY_DATA_POLARITY	(1 << 23)
 
+struct usbhs_phy_data {
+	int port;		/* 1 indexed port number */
+	int reset_gpio;
+	int vcc_gpio;
+	bool vcc_polarity;	/* 1 active high, 0 active low */
+	void *platform_data;
+};
+
 extern void usb_musb_init(struct omap_musb_board_data *board_data);
 extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
+extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
 
 extern void am35x_musb_reset(void);
 extern void am35x_musb_phy_power(u8 on);
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux