On Friday 15 March 2013 10:30 AM, Will Deacon wrote:
> On Thu, Mar 14, 2013 at 01:08:00PM +0530, Santosh Shilimkar wrote:
>> Will,
>
> Hi guys,
>
> I'm out of the office at the moment and have really terrible connectivity,
> so I can't do too much until next week. However, I don't think adding the
> has_ossr check is the right fix for this problem.
>
>> On Wednesday 13 March 2013 05:59 PM, Lokesh Vutla wrote:
>>> Hi Dietmar,
>>> On Wednesday 13 March 2013 05:35 PM, Dietmar Eggemann wrote:
>>>> On 13/03/13 06:52, Lokesh Vutla wrote:
>>>>> Commit {9a6eb31 ARM: hw_breakpoint: Debug powerdown support for
>>>>> self-hosted
>>>>> debug} introduces debug powerdown support for self-hosted debug.
>>>>> While merging the patch 'has_ossr' check was removed which
>>>>> was needed for hardwares which doesn't support self-hosted debug.
>>>>> Pandaboard (A9) is one such hardware and Dietmar's orginial
>>>>> patch did mention this issue.
>>>>> Without that check on Panda with CPUIDLE enabled, a flood of
>>>>> below messages thrown.
>>>>>
>>>>> [ 3.597930] hw-breakpoint: CPU 0 failed to disable vector catch
>>>>> [ 3.597991] hw-breakpoint: CPU 1 failed to disable vector catch
>
> Ok, so this means that we've taken an undefined instruction exception while
> trying to reset the debug registers on the PM_EXIT path. Now, the code there
> deals with CPUs that don't have the save/restore registers just fine, so
> that shouldn't have anything to do with this problem, particularly if the
> bit that is tripping us up is related to clearing vector catch.
>
Agree.
> Furthermore, I was under the impression that hw_breakpoint did actually
> work on panda, which implies that a cold boot *does* manage to reset the
> registers (can you please confirm this by looking in your dmesg during
> boot?). In that case, it seems as though a PM cycle is powering down a
> bunch of debug logic that was powered up during boot, and then we trip over
> because we can't access the register bank.
>
Actually it seems to be without PM. Thanks to analysis from Lokesh, the issue
can be seen even with just suspend or cpu hotplug. So cold boot as such is
fine.
> The proper solution to this problem requires us to establish exactly what is
> turning off the debug registers, and then having an OMAP PM notifier to
> enable it again. Assuming this has always been the case, I expect hardware
> debug across PM fails silently with older kernels.
>
This has been always the case it seems with CPU power cycle.
After the CPU is power cycled, 'DBGAUTHSTATUS' reads '0xaa' rather
than '0xaf' which means 'DBGEN = 0' and hence code fails to enable
monitor mode. This happens on both secure and GP devices and it can not
be patched since the secure code is ROM'ed. We didn't notice so far
because hw_breakpoint support was not default enabled on OMAP till the
multi-platform build.
>> I was also wondering whether we should just warn once rather
>> than continuous warnings in the notifier. Patch is end of the
>> email.
>
> Could do, but I'd like to see a fix for the real issue before we simply hide
> the warnings :)
>
Agree here too. As evident above, the feature won't work on OMAP4
devices with PM and hence some solution is needed.
What you think of below ?
>From d74b4264f6a5967b0f7ada96aad77ab0ac30dbed Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Date: Mon, 18 Mar 2013 11:59:04 +0530
Subject: [PATCH] ARM: hw_breakpoints: Check for CPU debug availability before
enabling it
CPU debug features like hardware break, watchpoints can be used only when
the debug mode is enabled and available for non-secure mode.
Hence check 'DBGAUTHSTATUS.DBGEN' before proceeding to enable the
features.
Thanks to Will for pointers and Lokesh for the analysis of the issue on
OMAP4 where after a CPU power cycle, debug mode gets disabled.
Cc: Will Deacon <Will.Deacon@xxxxxxx>
Tested-by: Lokesh Vutla <lokeshvutla@xxxxxx>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
---
arch/arm/kernel/hw_breakpoint.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 96093b7..683a7cf 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -930,6 +930,14 @@ static void reset_ctrl_regs(void *unused)
int i, raw_num_brps, err = 0, cpu = smp_processor_id();
u32 val;
+ /* Check if we have access to CPU debug features */
+ ARM_DBG_READ(c7, c14, 6, val);
+ if ((val & 0x1) == 0) {
+ pr_warn_once("CPU %d debug is unavailable\n", cpu);
+ cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
+ return;
+ }
+
/*
* v7 debug contains save and restore registers so that debug state
* can be maintained across low-power modes without leaving the debug
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
