I have a pandora board which has similar musb setup to beagleboard
(OMAP3530 + TWL4030) and musb never worked well on it for me in mainline.
Well it usually works if you plug the cable once, but as soon as you start
replugging cables and mixing host adapter into the game it totally breaks
and reboot is then needed. Host mode is especially broken, any replugs
after musb has been in host mode result in dead port that needs reboot
to recover.
With this series I can switch host/peripheral cables any way I like and
even suspend works with cable plugged with musb in peripheral mode!
("ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb" is
needed that was sent separately). This also fixes power drain when cable
is plugged an no gadget driver is loaded.
Changed since v1:
- rebased on Felipe's testing branch
- added locking for patch 4 to take care of possible races
between work item and IRQ
- changed patch 6 to only disable VBUS if not runtime suspended,
otherwise we get data abort on OMAP3
Grazvydas Ignotas (7):
usb: phy: twl4030-usb: don't enable PHY during init
usb: phy: twl4030-usb: ignore duplicate events
usb: phy: twl4030-usb: don't switch the phy on/off needlessly
usb: phy: twl4030-usb: poll for ID disconnect
usb: phy: twl4030-usb: check if vbus is driven by twl itself
usb: musb: omap2430: turn off vbus on cable disconnect
usb: musb: gadget: use platform callback to enable vbus
drivers/usb/musb/musb_gadget.c | 5 +-
drivers/usb/musb/omap2430.c | 1 +
drivers/usb/phy/phy-twl4030-usb.c | 123 +++++++++++++++++++++++++++++--------
3 files changed, 99 insertions(+), 30 deletions(-)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
