Hi Javier, On Sat, Mar 16, 2013 at 2:53 PM, Javier Martinez Canillas <javier@xxxxxxxxxxxx> wrote: > On Sat, Mar 16, 2013 at 5:44 AM, Anil Kumar <anilk4.v@xxxxxxxxx> wrote: >> Hi, >> >> I am getting kernel uImage build issue on omap2+ log[1] >> >> Taken kernel branch "for_3.10/dts" from >> https://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git >> >> Taking reference from >> https://kernel.googlesource.com/pub/scm/linux/kernel/git/tmlind/linux-omap/+/omap-for-v3.9/multiplatform-enable-signed-v2 >> >> Am I missing some thing ? >> >> [1] >> anil@anil-laptop:~/Anil/omap3/bcousson$ mkimage -A arm -O linux -T >> kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d >> zImage-omap2plus uImage-omap2plus >> mkimage: Can't open zImage-omap2plus: No such file or directory >> anil@anil-laptop:~/Anil/omap3/bcousson$ >> >> Thanks, >> Anil >> > > Hi Anil, > > It seems that Tony's email assumed that you generated a bunch of > zImages for different platforms and then naming them zImage-$platform. > > e.g: > > $ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap2plus_defconfig > $ make -j 4 ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- zImage modules > zImage-omap2plus > $ cp cp arch/arm/boot/zImage zImage-omap2plus > > and then you can use the command in [1]: > > $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e > 0x80008000 -n "Linux" -d zImage-omap2plus uImage-omap2plus > > anyways, the problem is that zImage-omap2plus does not exist and you > have to use the zImage generated by "make zImage". What I usually do > is just: > > $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e > 0x80008000 -n "Linux" -d arch/arm/boot/zImage uImage-omap2plus > > and then copy uImage-omap2plus as uImage on either my board MMC/SD or > Flash memory. Thanks, It solved the issue Anil -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
