Convert the OMAP2+ NAND code to use the gpmc_cs_program_settings()
function for configuring the various GPMC options instead of directly
programming the CONFIG1 register.
This moves the configuration of some GPMC options outside the
nand_gpmc_retime() because these options should only need to be set once
regardless of whether the gpmc timing is changing dynamically at runtime.
The programming of where the wait-pin is also moved slightly, but this
will not have any impact to existing devices as no boards are currently
setting the dev_ready variable.
Signed-off-by: Jon Hunter <jon-hunter@xxxxxx>
---
arch/arm/mach-omap2/gpmc-nand.c | 35 +++++++++++++++++++++++------------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index e50e438..75feb95 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime(
t.cs_wr_off = gpmc_t->cs_wr_off;
t.wr_cycle = gpmc_t->wr_cycle;
- /* Configure GPMC */
- if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
- else
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
- gpmc_cs_configure(gpmc_nand_data->cs,
- GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
if (err)
return err;
@@ -115,8 +107,11 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
struct gpmc_timings *gpmc_t)
{
int err = 0;
+ struct gpmc_settings s;
struct device *dev = &gpmc_nand_device.dev;
+ memset(&s, 0, sizeof(struct gpmc_settings));
+
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
@@ -141,11 +136,27 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
}
- }
- /* Enable RD PIN Monitoring Reg */
- if (gpmc_nand_data->dev_ready) {
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
+ s.device_nand = true;
+
+ /* Enable RD PIN Monitoring Reg */
+ if (gpmc_nand_data->dev_ready) {
+ s.wait_on_read = true;
+ s.wait_on_write = true;
+ }
+
+ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+ s.device_width = GPMC_DEVWIDTH_16BIT;
+ else
+ s.device_width = GPMC_DEVWIDTH_8BIT;
+
+ err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
+ if (err < 0)
+ goto out_free_cs;
+
+ err = gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
+ if (err < 0)
+ goto out_free_cs;
}
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
