Re: [PATCH 12/12] USB: ehci-omap: Fix detection in HSIC mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tuesday 12 March 2013 04:14 PM, Roger Quadros wrote:
The HSIC devices need to be kept in reset while the EHCI controller
is being initialized and only brought out of reset after the
initialization is complete, else HSIC devices will not be detected.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
CC: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
---
  drivers/usb/host/ehci-omap.c |   28 +++++++++++-----------------
  1 files changed, 11 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 1ba1df8..52a2d46 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -50,6 +50,7 @@
  #include <linux/usb/hcd.h>
  #include <linux/of.h>
  #include <linux/dma-mapping.h>
+#include <linux/delay.h>

not needed here I guess.

  #include "ehci.h"

@@ -90,26 +91,13 @@ static inline u32 ehci_read(void __iomem *base, u32 reg)
  static int omap_ehci_init(struct usb_hcd *hcd)
  {
  	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
-	struct omap_hcd	*omap = (struct omap_hcd *)ehci->priv;
-	int rc, i;
-
-	/* Hold PHYs in reset while initializing EHCI controller */
-	for (i = 0; i < omap->nports; i++) {
-		if (omap->phy[i])
-			usb_phy_shutdown(omap->phy[i]);
-	}
+	int rc;

  	/* we know this is the memory we want, no need to ioremap again */
  	ehci->caps = hcd->regs;

  	rc = ehci_setup(hcd);

-	/* Bring PHYs out of reset */
-	for (i = 0; i < omap->nports; i++) {
-		if (omap->phy[i])
-			usb_phy_init(omap->phy[i]);
-	}
-
  	return rc;
  }

@@ -219,9 +207,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
  		}

  		omap->phy[i] = phy;
-		usb_phy_init(omap->phy[i]);
-		/* bring PHY out of suspend */
-		usb_phy_set_suspend(omap->phy[i], 0);
  	}

  	pm_runtime_enable(dev);
@@ -245,6 +230,15 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
  		goto err_pm_runtime;
  	}

+	/* Bring PHYs out of reset */
+	for (i = 0; i < omap->nports; i++) {
+		if (!omap->phy[i])
+			continue;
+
+		usb_phy_init(omap->phy[i]);
+		/* bring PHY out of suspend */
+		usb_phy_set_suspend(omap->phy[i], 0);
+	}

But isn't HSIC supposed to be PHYless devices. Maybe a comment explaining it might be helpful.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux