On Monday 11 March 2013 05:35 PM, Tomi Valkeinen wrote:
On 2013-03-11 07:35, Archit Taneja wrote:
Hi,
On Friday 08 March 2013 05:21 PM, Tomi Valkeinen wrote:
The DISPC channel used for each output is currently passed in panel
platform data from the board files.
To simplify this, and to make the panel drivers less dependent on OMAP,
this patch changes omapdss to resolve the channel independently. The
channel is resolved based on the OMAP version and, in case of DSI, the
DSI module id.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++-----
drivers/video/omap2/dss/dsi.c | 48
++++++++++++++++++++++++++++++++++++++++
drivers/video/omap2/dss/rfbi.c | 2 ++
drivers/video/omap2/dss/sdi.c | 2 ++
4 files changed, 84 insertions(+), 5 deletions(-)
diff --git a/drivers/video/omap2/dss/dpi.c
b/drivers/video/omap2/dss/dpi.c
index e282456..3261644 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -396,12 +396,44 @@ static int __init dpi_verify_dsi_pll(struct
platform_device *dsidev)
return 0;
}
+/*
+ * Return a hardcoded channel for the DPI output. This should work for
+ * current use cases, but this can be later expanded to either resolve
+ * the channel in some more dynamic manner, or get the channel as a user
+ * parameter.
+ */
+static enum omap_channel dpi_get_channel(void)
+{
+ switch (omapdss_get_version()) {
+ case OMAPDSS_VER_OMAP24xx:
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_OMAP3630:
+ case OMAPDSS_VER_AM35xx:
+ return OMAP_DSS_CHANNEL_LCD;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
+ return OMAP_DSS_CHANNEL_LCD2;
+
+ case OMAPDSS_VER_OMAP5:
+ return OMAP_DSS_CHANNEL_LCD2;
+
+ default:
+ DSSWARN("unsupported DSS version\n");
+ return OMAP_DSS_CHANNEL_LCD;
+ }
+}
+
static int __init dpi_init_display(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev;
DSSDBG("init_display\n");
+ dssdev->channel = dpi_get_channel();
In patch 14 of the series, we remove these dssdev->channel assignments.
I don't see the point of adding them in this patch in the first place.
The dssdev->channel assignments will not be modified in this series, so
we don't need to worry about a kernel crash or something after this patch.
I feel this patch should only add the dpi_get_channel and
dsi_get_channel funcs.
Here's the combined patch. I changed the recommended_channel to dispc_channel.
"recommended" was not that good name, as currently the channel cannot be changed
later, because, for example in DPI case, we store the DSI PLL which is based on
the channel.
The patch looks fine now.
Reviewed-by: Archit Taneja <archit@xxxxxx>
Archit
Author: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Date: Wed Feb 13 11:23:54 2013 +0200
OMAPDSS: add output->dispc_channel
The DISPC channel used for each output is currently passed in panel
platform data from the board files.
To simplify this, and to make the panel drivers less dependent on OMAP,
this patch changes omapdss to resolve the channel independently. The
channel is resolved based on the OMAP version and, in case of DSI, the
DSI module id. This resolved channel is stored into a new field in
output, dispc_channel.
The few places where dssdev->channel was used are changed to use
output->recommended_channel. After this patch, dssdev->channel is
obsolete.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index e282456..409e53b 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -396,6 +396,36 @@ static int __init dpi_verify_dsi_pll(struct platform_device *dsidev)
return 0;
}
+/*
+ * Return a hardcoded channel for the DPI output. This should work for
+ * current use cases, but this can be later expanded to either resolve
+ * the channel in some more dynamic manner, or get the channel as a user
+ * parameter.
+ */
+static enum omap_channel dpi_get_channel(void)
+{
+ switch (omapdss_get_version()) {
+ case OMAPDSS_VER_OMAP24xx:
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_OMAP3630:
+ case OMAPDSS_VER_AM35xx:
+ return OMAP_DSS_CHANNEL_LCD;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
+ return OMAP_DSS_CHANNEL_LCD2;
+
+ case OMAPDSS_VER_OMAP5:
+ return OMAP_DSS_CHANNEL_LCD3;
+
+ default:
+ DSSWARN("unsupported DSS version\n");
+ return OMAP_DSS_CHANNEL_LCD;
+ }
+}
+
static int __init dpi_init_display(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev;
@@ -416,12 +446,7 @@ static int __init dpi_init_display(struct omap_dss_device *dssdev)
dpi.vdds_dsi_reg = vdds_dsi;
}
- /*
- * XXX We shouldn't need dssdev->channel for this. The dsi pll clock
- * source for DPI is SoC integration detail, not something that should
- * be configured in the dssdev
- */
- dsidev = dpi_get_dsidev(dssdev->channel);
+ dsidev = dpi_get_dsidev(dpi.output.dispc_channel);
if (dsidev && dpi_verify_dsi_pll(dsidev)) {
dsidev = NULL;
@@ -513,6 +538,7 @@ static void __init dpi_init_output(struct platform_device *pdev)
out->id = OMAP_DSS_OUTPUT_DPI;
out->type = OMAP_DISPLAY_TYPE_DPI;
out->name = "dpi";
+ out->dispc_channel = dpi_get_channel();
dss_register_output(out);
}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 1a6ad6f..28e0b99 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4946,6 +4946,55 @@ void omapdss_dsi_set_videomode_timings(struct omap_dss_device *dssdev,
}
EXPORT_SYMBOL(omapdss_dsi_set_videomode_timings);
+/*
+ * Return a hardcoded channel for the DSI output. This should work for
+ * current use cases, but this can be later expanded to either resolve
+ * the channel in some more dynamic manner, or get the channel as a user
+ * parameter.
+ */
+static enum omap_channel dsi_get_channel(int module_id)
+{
+ switch (omapdss_get_version()) {
+ case OMAPDSS_VER_OMAP24xx:
+ DSSWARN("DSI not supported\n");
+ return OMAP_DSS_CHANNEL_LCD;
+
+ case OMAPDSS_VER_OMAP34xx_ES1:
+ case OMAPDSS_VER_OMAP34xx_ES3:
+ case OMAPDSS_VER_OMAP3630:
+ case OMAPDSS_VER_AM35xx:
+ return OMAP_DSS_CHANNEL_LCD;
+
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
+ switch (module_id) {
+ case 0:
+ return OMAP_DSS_CHANNEL_LCD;
+ case 1:
+ return OMAP_DSS_CHANNEL_LCD2;
+ default:
+ DSSWARN("unsupported module id\n");
+ return OMAP_DSS_CHANNEL_LCD;
+ }
+
+ case OMAPDSS_VER_OMAP5:
+ switch (module_id) {
+ case 0:
+ return OMAP_DSS_CHANNEL_LCD;
+ case 1:
+ return OMAP_DSS_CHANNEL_LCD3;
+ default:
+ DSSWARN("unsupported module id\n");
+ return OMAP_DSS_CHANNEL_LCD;
+ }
+
+ default:
+ DSSWARN("unsupported DSS version\n");
+ return OMAP_DSS_CHANNEL_LCD;
+ }
+}
+
static int __init dsi_init_display(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev =
@@ -5184,6 +5233,7 @@ static void __init dsi_init_output(struct platform_device *dsidev)
out->type = OMAP_DISPLAY_TYPE_DSI;
out->name = dsi->module_id == 0 ? "dsi0" : "dsi1";
+ out->dispc_channel = dsi_get_channel(dsi->module_id);
dss_register_output(out);
}
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 888cfe3..e03619a 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -1012,8 +1012,6 @@ static void __init hdmi_probe_pdata(struct platform_device *pdev)
hdmi.ls_oe_gpio = priv->ls_oe_gpio;
hdmi.hpd_gpio = priv->hpd_gpio;
- dssdev->channel = OMAP_DSS_CHANNEL_DIGIT;
-
r = hdmi_init_display(dssdev);
if (r) {
DSSERR("device %s init failed: %d\n", dssdev->name, r);
@@ -1047,6 +1045,7 @@ static void __init hdmi_init_output(struct platform_device *pdev)
out->id = OMAP_DSS_OUTPUT_HDMI;
out->type = OMAP_DISPLAY_TYPE_HDMI;
out->name = "hdmi";
+ out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
dss_register_output(out);
}
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index a47a9e5..05c0646 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -1026,6 +1026,7 @@ static void __init rfbi_init_output(struct platform_device *pdev)
out->id = OMAP_DSS_OUTPUT_DBI;
out->type = OMAP_DISPLAY_TYPE_DBI;
out->name = "rfbi";
+ out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
dss_register_output(out);
}
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0802927..5d37db5 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -279,6 +279,7 @@ static void __init sdi_init_output(struct platform_device *pdev)
out->id = OMAP_DSS_OUTPUT_SDI;
out->type = OMAP_DISPLAY_TYPE_SDI;
out->name = "sdi";
+ out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
dss_register_output(out);
}
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index c8130f8..866e015 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -786,8 +786,6 @@ static void __init venc_probe_pdata(struct platform_device *vencdev)
dss_copy_device_pdata(dssdev, plat_dssdev);
- dssdev->channel = OMAP_DSS_CHANNEL_DIGIT;
-
r = venc_init_display(dssdev);
if (r) {
DSSERR("device %s init failed: %d\n", dssdev->name, r);
@@ -820,6 +818,7 @@ static void __init venc_init_output(struct platform_device *pdev)
out->id = OMAP_DSS_OUTPUT_VENC;
out->type = OMAP_DISPLAY_TYPE_VENC;
out->name = "venc";
+ out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
dss_register_output(out);
}
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index ca585ef..f38348e 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -2388,7 +2388,7 @@ static int omapfb_init_connections(struct omapfb2_device *fbdev,
struct omap_dss_device *dssdev = fbdev->displays[i].dssdev;
struct omap_dss_output *out = dssdev->output;
- mgr = omap_dss_get_overlay_manager(dssdev->channel);
+ mgr = omap_dss_get_overlay_manager(out->dispc_channel);
if (!mgr || !out)
continue;
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index ba9cea7..ec322a7 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -547,6 +547,9 @@ struct omap_dss_output {
/* display type supported by the output */
enum omap_display_type type;
+ /* DISPC channel for this output */
+ enum omap_channel dispc_channel;
+
/* output instance */
enum omap_dss_output_id id;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
