On USB_EVENT_ID event the musb glue enables VBUS by calling
omap2430_musb_set_vbus(musb, 1) that sets the session bit, but on
USB_EVENT_NONE reverse action is never made, and that breaks PM.
Disable VBUS unconditionally on USB_EVENT_NONE to be sure musb
session is ended on cable unplug so that PM works.
Signed-off-by: Grazvydas Ignotas <notasas@xxxxxxxxx>
---
drivers/usb/musb/omap2430.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2a39c11..d430677 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -296,6 +296,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
pm_runtime_put_autosuspend(dev);
}
+ omap2430_musb_set_vbus(musb, 0);
if (data->interface_type == MUSB_INTERFACE_UTMI) {
if (musb->xceiv->otg->set_vbus)
otg_set_vbus(musb->xceiv->otg, 0);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
