Store dispc core clock rate so that it's available for calculations even if the HW is disabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> --- drivers/video/omap2/dss/dispc.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index 05ff2b9..f564955 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -97,6 +97,8 @@ static struct { int irq; + unsigned long core_clk_rate; + u32 fifo_size[DISPC_MAX_NR_FIFOS]; /* maps which plane is using a fifo. fifo-id -> plane-id */ int fifo_assignment[DISPC_MAX_NR_FIFOS]; @@ -2951,6 +2953,10 @@ static void dispc_mgr_set_lcd_divisor(enum omap_channel channel, u16 lck_div, dispc_write_reg(DISPC_DIVISORo(channel), FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); + + if (dss_has_feature(FEAT_CORE_CLK_DIV) == false && + channel == OMAP_DSS_CHANNEL_LCD) + dispc.core_clk_rate = dispc_fclk_rate() / lck_div; } static void dispc_mgr_get_lcd_divisor(enum omap_channel channel, int *lck_div, @@ -3056,15 +3062,7 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel) unsigned long dispc_core_clk_rate(void) { - int lcd; - unsigned long fclk = dispc_fclk_rate(); - - if (dss_has_feature(FEAT_CORE_CLK_DIV)) - lcd = REG_GET(DISPC_DIVISOR, 23, 16); - else - lcd = REG_GET(DISPC_DIVISORo(OMAP_DSS_CHANNEL_LCD), 23, 16); - - return fclk / lcd; + return dispc.core_clk_rate; } static unsigned long dispc_plane_pclk_rate(enum omap_plane plane) @@ -3451,6 +3449,8 @@ static void _omap_dispc_initial_config(void) l = FLD_MOD(l, 1, 0, 0); l = FLD_MOD(l, 1, 23, 16); dispc_write_reg(DISPC_DIVISOR, l); + + dispc.core_clk_rate = dispc_fclk_rate(); } /* FUNCGATED */ -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html