there are no more users of CONFIG_USB_OTG_UTILS left in tree, we can remove it just fine. Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- drivers/usb/phy/Kconfig | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 832cd69..97de6de 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -3,7 +3,6 @@ # menuconfig USB_PHY tristate "USB Physical Layer drivers" - select USB_OTG_UTILS help USB controllers (those which are host, device or DRD) need a device to handle the physical layer signalling, commonly called @@ -13,19 +12,12 @@ menuconfig USB_PHY if USB_PHY -config USB_OTG_UTILS - bool - help - Select this to make sure the build includes objects from - the OTG infrastructure directory. - # # USB Transceiver Drivers # config AB8500_USB tristate "AB8500 USB Transceiver Driver" depends on AB8500_CORE - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver in AB8500 chip. This transceiver supports high and full speed devices plus, @@ -35,14 +27,12 @@ config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND select USB_OTG - select USB_OTG_UTILS help Enable this to support Freescale USB OTG transceiver. config ISP1301_OMAP tristate "Philips ISP1301 with OMAP OTG" depends on I2C && ARCH_OMAP_OTG - select USB_OTG_UTILS help If you say yes here you get support for the Philips ISP1301 USB-On-The-Go transceiver working with the OMAP OTG controller. @@ -56,14 +46,12 @@ config ISP1301_OMAP config MV_U3D_PHY bool "Marvell USB 3.0 PHY controller Driver" depends on USB_MV_U3D - select USB_OTG_UTILS help Enable this to support Marvell USB 3.0 phy controller for Marvell SoC. config NOP_USB_XCEIV tristate "NOP USB Transceiver Driver" - select USB_OTG_UTILS help This driver is to be used by all the usb transceiver which are either built-in with usb ip or which are autonomous and doesn't require any @@ -81,7 +69,6 @@ config OMAP_CONTROL_USB config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS - select USB_OTG_UTILS select OMAP_CONTROL_USB help Enable this to support the transceiver that is part of SOC. This @@ -91,7 +78,6 @@ config OMAP_USB2 config OMAP_USB3 tristate "OMAP USB3 PHY Driver" - select USB_OTG_UTILS select OMAP_CONTROL_USB help Enable this to support the USB3 PHY that is part of SOC. This @@ -102,7 +88,6 @@ config OMAP_USB3 config SAMSUNG_USBPHY bool "Samsung USB PHY controller Driver" depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS - select USB_OTG_UTILS help Enable this to support Samsung USB phy controller for samsung SoCs. @@ -110,7 +95,6 @@ config SAMSUNG_USBPHY config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 family chips (including the TWL5030 and TPS659x0 devices). @@ -120,7 +104,6 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 family chips. This TWL6030 transceiver has the VBUS and ID GND @@ -132,7 +115,6 @@ config TWL6030_USB config USB_GPIO_VBUS tristate "GPIO based peripheral-only VBUS sensing 'transceiver'" depends on GENERIC_GPIO - select USB_OTG_UTILS help Provides simple GPIO VBUS sensing for controllers with an internal transceiver via the usb_phy interface, and @@ -154,7 +136,6 @@ config USB_ISP1301 config USB_MSM_OTG tristate "OTG support for Qualcomm on-chip USB controller" depends on (USB || USB_GADGET) && ARCH_MSM - select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on MSM chips. It handles PHY initialization, clock management, and workarounds @@ -168,7 +149,6 @@ config USB_MV_OTG tristate "Marvell USB OTG support" depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND select USB_OTG - select USB_OTG_UTILS help Say Y here if you want to build Marvell USB OTG transciever driver in kernel (including PXA and MMP series). This driver @@ -180,7 +160,6 @@ config USB_MXS_PHY tristate "Freescale MXS USB PHY support" depends on ARCH_MXC || ARCH_MXS select STMP_DEVICE - select USB_OTG_UTILS help Enable this to support the Freescale MXS USB PHY. @@ -189,7 +168,6 @@ config USB_MXS_PHY config USB_RCAR_PHY tristate "Renesas R-Car USB phy support" depends on USB || USB_GADGET - select USB_OTG_UTILS help Say Y here to add support for the Renesas R-Car USB phy driver. This chip is typically used as USB phy for USB host, gadget. @@ -201,7 +179,6 @@ config USB_RCAR_PHY config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM - select USB_OTG_UTILS help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. -- 1.8.1.rc1.5.g7e0651a -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
