2013/3/5 Andreas Müller <schnitzeltony@xxxxxxxxxxxxxx>: > On Fri, Mar 1, 2013 at 10:07 PM, Andreas Müller > <schnitzeltony@xxxxxxxxxxxxxx> wrote: >> On Thu, Feb 28, 2013 at 5:27 PM, Andreas Müller >> <schnitzeltony@xxxxxxxxxxxxxx> wrote: >>> Hi, >>> >>> I am preparing 3.8 mainline for gumstix overo and have the following >>> issue: waking Monitor connected by HDMI from power save makes Monitor >>> complain for unsupported frequency and console says: >>> >>> | omapdss APPLY error: FIFO UNDERFLOW on gfx, disabling the overlay >>> >>> Is this a known issue? >>> >> Sorry for the noise but this is the only issue I have with 3.8.1 >> stable (currently). Some further notes: >> >> * with old OMAP 3530 (only 600MHz capable) the HDMI does not work for >> warm restart and not for pressing reset. The only way out is power-off >> / power on. This I saw with 3.6 the first time but I did not follow it >> at that time. >> * My kernel command line is >> console=ttyO2,115200n8 mpurate=800 vram=12M >> omapfb.mode=dvi:1280x1024MR-24@60 omapdss.def_disp=dvi >> root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait >> I added omapdss.debug=y and omapdss.debug=1 but that did give me >> further information. Are there other settings available helping to >> debug this? >> * I attached kernel config and bootlog for proper start - maybe this >> gives some hint. >> * Monitor power down is caused by XFCE power management >> >> Is there any other information I can give to solve this? >> > FWIW DM3730 (Overo fire storm) the wakeup causes some additional warning It happens on DM3730 right now as well. That's bad news. When I was working on the problem I read this discussion, maybe it can help you: http://thread.gmane.org/gmane.linux.ports.arm.omap/76021/focus=76030 > > omapdss APPLY error: FIFO UNDERFLOW on gfx, disabling the overlay > ------------[ cut here ]------------ > WARNING: at drivers/video/omap2/dss/dispc.c:543 dispc_mgr_go+0x20/0x54() > Modules linked in: libertas_sdio libertas lib80211 cfg80211 rfkill > ads7846 gpio_keys > [<c001254c>] (unwind_backtrace+0x0/0xe0) from [<c002e7fc>] > (warn_slowpath_common+0x4c/0x64) > [<c002e7fc>] (warn_slowpath_common+0x4c/0x64) from [<c002e82c>] > (warn_slowpath_null+0x18/0x1c) > [<c002e82c>] (warn_slowpath_null+0x18/0x1c) from [<c0370cc0>] > (dispc_mgr_go+0x20/0x54) > [<c0370cc0>] (dispc_mgr_go+0x20/0x54) from [<c037a900>] > (dispc_error_worker+0x6c/0x18c) > [<c037a900>] (dispc_error_worker+0x6c/0x18c) from [<c004667c>] > (process_one_work+0x1fc/0x3dc) > [<c004667c>] (process_one_work+0x1fc/0x3dc) from [<c0046c08>] > (worker_thread+0x238/0x34c) > [<c0046c08>] (worker_thread+0x238/0x34c) from [<c004ad08>] (kthread+0xa0/0xb0) > [<c004ad08>] (kthread+0xa0/0xb0) from [<c000d938>] (ret_from_fork+0x14/0x3c) > ---[ end trace 40fcd9df3dd2aaf5 ]--- > > Andreas > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- --- motzblog.wordpress.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html