Currently the OMAP GPIO driver uses a legacy mapping for the GPIO IRQ
domain. This is not necessary because we do not need to assign a
specific interrupt number to the GPIO IRQ domain. Therefore, convert
the OMAP GPIO driver to use a linear mapping instead.
Please note that this also allows to simplify the logic in the OMAP
gpio_irq_handler() routine, by using irq_find_mapping() to obtain the
virtual irq number from the GPIO bank and bank index.
Reported-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Jon Hunter <jon-hunter@xxxxxx>
---
drivers/gpio/gpio-omap.c | 72 ++++++++++++++++++++--------------------------
1 file changed, 31 insertions(+), 41 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 159f5c5..c3598d1 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -53,7 +53,6 @@ struct gpio_bank {
struct list_head node;
void __iomem *base;
u16 irq;
- int irq_base;
struct irq_domain *domain;
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
@@ -89,7 +88,14 @@ struct gpio_bank {
static int irq_to_gpio(struct gpio_bank *bank, unsigned int gpio_irq)
{
- return gpio_irq - bank->irq_base + bank->chip.base;
+ return bank->chip.base + gpio_irq;
+}
+
+static int omap_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
+
+ return irq_find_mapping(bank->domain, offset);
}
static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
@@ -427,7 +433,7 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
#endif
if (!gpio)
- gpio = irq_to_gpio(bank, d->irq);
+ gpio = irq_to_gpio(bank, d->hwirq);
if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
@@ -580,7 +586,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned int gpio = irq_to_gpio(bank, d->irq);
+ unsigned int gpio = irq_to_gpio(bank, d->hwirq);
return _set_gpio_wakeup(bank, gpio, enable);
}
@@ -680,7 +686,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
void __iomem *isr_reg = NULL;
u32 isr;
- unsigned int gpio_irq, gpio_index;
+ unsigned int i;
struct gpio_bank *bank;
int unmasked = 0;
struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -721,15 +727,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (!isr)
break;
- gpio_irq = bank->irq_base;
- for (; isr != 0; isr >>= 1, gpio_irq++) {
- int gpio = irq_to_gpio(bank, gpio_irq);
-
+ for (i = 0; isr != 0; isr >>= 1, i++) {
if (!(isr & 1))
continue;
- gpio_index = GPIO_INDEX(bank, gpio);
-
/*
* Some chips can't respond to both rising and falling
* at the same time. If this irq was requested with
@@ -737,10 +738,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
* to respond to the IRQ for the opposite direction.
* This will be indicated in the bank toggle_mask.
*/
- if (bank->toggle_mask & (1 << gpio_index))
- _toggle_gpio_edge_triggering(bank, gpio_index);
+ if (bank->toggle_mask & (1 << i))
+ _toggle_gpio_edge_triggering(bank, i);
- generic_handle_irq(gpio_irq);
+ generic_handle_irq(irq_find_mapping(bank->domain, i));
}
}
/* if bank has any level sensitive GPIO pin interrupt
@@ -756,7 +757,7 @@ exit:
static void gpio_irq_shutdown(struct irq_data *d)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned int gpio = irq_to_gpio(bank, d->irq);
+ unsigned int gpio = irq_to_gpio(bank, d->hwirq);
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
@@ -767,7 +768,7 @@ static void gpio_irq_shutdown(struct irq_data *d)
static void gpio_ack_irq(struct irq_data *d)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned int gpio = irq_to_gpio(bank, d->irq);
+ unsigned int gpio = irq_to_gpio(bank, d->hwirq);
_clear_gpio_irqstatus(bank, gpio);
}
@@ -775,7 +776,7 @@ static void gpio_ack_irq(struct irq_data *d)
static void gpio_mask_irq(struct irq_data *d)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned int gpio = irq_to_gpio(bank, d->irq);
+ unsigned int gpio = irq_to_gpio(bank, d->hwirq);
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
@@ -787,7 +788,7 @@ static void gpio_mask_irq(struct irq_data *d)
static void gpio_unmask_irq(struct irq_data *d)
{
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned int gpio = irq_to_gpio(bank, d->irq);
+ unsigned int gpio = irq_to_gpio(bank, d->hwirq);
unsigned int irq_mask = GPIO_BIT(bank, gpio);
u32 trigger = irqd_get_trigger_type(d);
unsigned long flags;
@@ -953,14 +954,6 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
spin_unlock_irqrestore(&bank->lock, flags);
}
-static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
-{
- struct gpio_bank *bank;
-
- bank = container_of(chip, struct gpio_bank, chip);
- return bank->irq_base + offset;
-}
-
/*---------------------------------------------------------------------*/
static void __init omap_gpio_show_rev(struct gpio_bank *bank)
@@ -1057,7 +1050,7 @@ static void omap_gpio_chip_init(struct gpio_bank *bank)
bank->chip.direction_output = gpio_output;
bank->chip.set_debounce = gpio_debounce;
bank->chip.set = gpio_set;
- bank->chip.to_irq = gpio_2irq;
+ bank->chip.to_irq = omap_gpio_to_irq;
if (bank->is_mpuio) {
bank->chip.label = "mpuio";
if (bank->regs->wkup_en)
@@ -1072,15 +1065,16 @@ static void omap_gpio_chip_init(struct gpio_bank *bank)
gpiochip_add(&bank->chip);
- for (j = bank->irq_base; j < bank->irq_base + bank->width; j++) {
- irq_set_lockdep_class(j, &gpio_lock_class);
- irq_set_chip_data(j, bank);
+ for (j = 0; j < bank->width; j++) {
+ int irq = irq_create_mapping(bank->domain, j);
+ irq_set_lockdep_class(irq, &gpio_lock_class);
+ irq_set_chip_data(irq, bank);
if (bank->is_mpuio) {
- omap_mpuio_alloc_gc(bank, j, bank->width);
+ omap_mpuio_alloc_gc(bank, irq, bank->width);
} else {
- irq_set_chip(j, &gpio_irq_chip);
- irq_set_handler(j, handle_simple_irq);
- set_irq_flags(j, IRQF_VALID);
+ irq_set_chip_and_handler(irq, &gpio_irq_chip,
+ handle_simple_irq);
+ set_irq_flags(irq, IRQF_VALID);
}
}
irq_set_chained_handler(bank->irq, gpio_irq_handler);
@@ -1130,14 +1124,10 @@ static int omap_gpio_probe(struct platform_device *pdev)
bank->chip.of_node = of_node_get(node);
#endif
- bank->irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
- if (bank->irq_base < 0) {
- dev_err(dev, "Couldn't allocate IRQ numbers\n");
+ bank->domain = irq_domain_add_linear(node, bank->width,
+ &irq_domain_simple_ops, NULL);
+ if (!bank->domain)
return -ENODEV;
- }
-
- bank->domain = irq_domain_add_legacy(node, bank->width, bank->irq_base,
- 0, &irq_domain_simple_ops, NULL);
if (bank->regs->set_dataout && bank->regs->clr_dataout)
bank->set_dataout = _set_gpio_dataout_reg;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
