Re: [PATCH 2/4] USB: dwc3: Adjust runtime pm the dwc3 driver to allow runtime suspend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Felipe,


On Wed, Feb 27, 2013 at 1:36 PM, Felipe Balbi <balbi@xxxxxx> wrote:
> Hi,
>
> sorry for the delay
>

That's alright ;-)

> On Mon, Jan 28, 2013 at 07:06:56PM +0530, Vivek Gautam wrote:
>> Hi Felipe,
>>
>>
>> On Mon, Jan 28, 2013 at 5:15 PM, Felipe Balbi <balbi@xxxxxx> wrote:
>> > On Mon, Jan 28, 2013 at 05:12:26PM +0530, Vivek Gautam wrote:
>> >> The current code in the dwc3 probe effectively disables runtime pm
>> >> from ever working because it calls a get() that was never put() until
>> >> device removal.  Change the runtime pm code to match the standard
>> >> formula and allow runtime pm to function.
>> >>
>> >> Note that this doesn't enable full runtime pm on the DWC3 device in
>> >> that the port isn't put into a lower power mode when not used.
>> >> However it does allow users of dwc3 (like dwc3-exynos) to do some
>> >> amount of runtime power management.
>> >>
>> >> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> >> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>> >> ---
>> >>  drivers/usb/dwc3/core.c |    4 +++-
>> >>  1 files changed, 3 insertions(+), 1 deletions(-)
>> >>
>> >> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> >> index 3a4004a..59c2494 100644
>> >> --- a/drivers/usb/dwc3/core.c
>> >> +++ b/drivers/usb/dwc3/core.c
>> >> @@ -453,6 +453,7 @@ static int dwc3_probe(struct platform_device *pdev)
>> >>       if (of_get_property(node, "tx-fifo-resize", NULL))
>> >>               dwc->needs_fifo_resize = true;
>> >>
>> >> +     pm_runtime_set_active(dev);
>> >
>> > this usage of pm_runtime_set_active() actually makes me a bit scared. At
>> > least OMAP starts with the device switched off, so this will probably
>> > break OMAP at least.
>>
>> I am fine with dropping pm_runtime_set_active(), actually thought
>> to put device in active state so that as and when system finds it idle,
>> force into suspend state.
>>
>> I fact should i drop  pm_runtime_set_active() calls from other places too
>> (xhci-plat, dwc3-exynos, and samsung-usb3 phy) and call get_sync() alongwith
>> enable() ?
>
> that's correct, make sure it works fine for you ;-)
>
Yeah sure.


-- 
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux