Hi, On Wed, Feb 20 2013, Russell King - ARM Linux wrote: > MMC looks sick - not sure what's going on with it though. mmc0 I believe > is the onboard eMMC, mmc1 is the external SD card with the rootfs. Any > ideas? Is this with 3.8 final, or mmc-next? > [ 1.253265] mmc0: new high speed MMC card at address 0001 > [ 1.260650] mmcblk0: mmc0:0001 SEM08G 7.39 GiB > [ 1.265594] mmcblk0boot0: mmc0:0001 SEM08G partition 1 1.00 MiB > [ 1.272003] mmcblk0boot1: mmc0:0001 SEM08G partition 2 1.00 MiB > [ 1.278411] mmcblk0rpmb: mmc0:0001 SEM08G partition 3 128 KiB > [ 1.289947] mmcblk0: unknown partition table > [ 1.297851] mmcblk0boot1: unknown partition table > [ 1.304321] mmcblk0boot0: unknown partition table > [ 1.471282] twl6040 1-004b: timeout waiting for READYINT > ... > [ 1.603820] mmc1: host does not support reading read-only switch. assuming wr > ite-enable. > [ 1.614105] mmc1: new high speed SD card at address 0002 > [ 1.620086] mmcblk1: mmc1:0002 00000 971 MiB > [ 1.626129] mmcblk1: p1 p2 > ... > [ 4.698455] VFS: Mounted root (ext3 filesystem) on device 179:34. > ... > [ 10.123077] mmcblk0rpmb: timed out sending r/w cmd command, card > status 0x400900 Ah, I think you need this patch from mmc-next: 30bedc8b4c99b0da585a8e983d6346773cb50794 mmc: core: expose RPMB partition only for CMD23 capable hosts It's already got a stable@ tag on it. I'll be sending mmc-next to Linus shortly and will make sure it gets into 3.8-stable; sorry it didn't make it into 3.8-final. - Chris. -- Chris Ball <cjb@xxxxxxxxxx> <http://printf.net/> One Laptop Per Child -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
