+ Rafael,
On Saturday 16 February 2013 02:25 PM, Felipe Balbi wrote:
Hi,
On Sat, Feb 16, 2013 at 11:31:21AM +0530, Santosh Shilimkar wrote:
The main goal is to avoid duplicating data both in hwmod and DT.
That's pretty much solved as we can have the driver probe populate
the common data for hwmod from DT as Santosh has already demonstrated.
Then we also want the driver specific idle and reset code to be done
in the drivers rather than in hwmod and glue it together with hwmod
using runtime PM. The biggest issue there is how do we reset and idle
some piece of hardware for PM purposes when there's no driver loaded.
right, this will be a tough nut to crack.
I guess the only way would be reset all IPs early in the boot process,
before even creating the platform-devices. Can we do that ? I mean, from
omap_device_build_from_dt() we have access to address space of all
devices, through ti,hwmods we can figure out which hwmods are linked to
that particular device, so whenever you build a device, you could just
call _reset().
Thats what we do today and it works perfectly. As per Tony's suggestion,
we need to move the non-probed devices reset and idle setup to late_init
which is also doable.
In that case when probed driver calls runtime_get(), we reset that
device and setup the idle settings. And remainder of the devices
are managed in late_init().
what's the point in moving it to late_initcall() ? It makes no
difference, if no driver binds to that device it will stay in reset
anyway. Maybe what we're missing is properly idling (not exactly) all
devices before driver probe kicks in.
I think it is largely reducing the early init dependencies and also
reducing the role of platform code who today takes care of every
device idle and reset initialization. That way late_init() will
only have to care about the devices which are not probed by
drivers.
Tony, Is that right ?
The only problem is that now omap_device_build_from_dt() is called after
we notify that a new device/driver pair has been registered with the
platform_bus, right ? So we would still need a way to call _reset() for
those which are on DTS but don't have a driver bound to them...
The only special requirement for reset remains(which today handled by
hwmod function calls) is for devices which needs specific reset
sequence. And this one can be handled through a runtime_reset()
kind of hook.
Does that sound reasonable ?
Depends on Rafael. If he says no to the ->runtime_reset() I suggested
earlier, another aproach needs to be found. In any case,
->runtime_reset() is only for devices which actually have a driver, so
it matters little.
I agree. Looping Rafael to hear from him.
To add a bit of context,
On OMAP we do have few IP blocks which needs a special reset sequence
during init as well as working state of the driver. Some of this
was worked around such cases by populating function pointers from
platform data which drivers can use. This obviously doesn't scale
and won't work with DT based builds. We have been thinking of
having a runtime_reset() generic callback which drivers can use.
Whats you take on it ?
The difficult part is handling special reset requirements for devices
without drivers as there'd be no ->runtime_reset() to call.
I don't think that requirement exists so if we address the driver
requirement, we are good. Even otherwise also, it can be managed
from platform code.
Regards,
Sasntosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
