DevKit8000 is a beagle board clone from Timll, sold by
armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D,
S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and
JTAG interface.
This patch adds the basic DT support for devkit8000. At this time, Information
of twl4030 (PMIC), MMC1, I2C1 and leds are added.
Signed-off-by: Anil Kumar <anilk4.v@xxxxxxxxx>
Tested-by: Thomas Weber <thomas@xxxxxxxxxxx>
---
-This patch is based on top of kernel 3.8-rc5.
-Tested on Devkit8000.
For V3:
- Remove pin mux as done at device boot time by default.
For V2:
- Change model name as "TimLL OMAP3 Devkit8000"
- Change compatible as "timll,omap3-devkit8000"
- Doing i2c1 pinmux default with pinctrl-single driver instead of i2c1
driver probe time.
:100644 100644 5ebb44f... 22ebc76... M arch/arm/boot/dts/Makefile
:000000 100644 0000000... 6338993... A arch/arm/boot/dts/omap3-devkit8000.dts
:100644 100644 53cb380b.. ccecb76... M arch/arm/mach-omap2/board-generic.c
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/omap3-devkit8000.dts | 103 ++++++++++++++++++++++++++++++++
arch/arm/mach-omap2/board-generic.c | 1 +
3 files changed, 105 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5ebb44f..22ebc76 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-beagle.dtb \
+ omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
new file mode 100644
index 0000000..6338993
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -0,0 +1,103 @@
+/*
+ * Author: Anil Kumar <anilk4.v@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+/ {
+ model = "TimLL OMAP3 Devkit8000";
+ compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "devkit8000::led1";
+ gpios = <&gpio6 26 0>; /* 186 -> LED1 */
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ mmc {
+ label = "devkit8000::led2";
+ gpios = <&gpio6 3 0>; /* 163 -> LED2 */
+ default-state = "on";
+ linux,default-trigger = "none";
+ };
+
+ usr {
+ label = "devkit8000::led3";
+ gpios = <&gpio6 4 0>; /* 164 -> LED3 */
+ default-state = "on";
+ linux,default-trigger = "usr";
+ };
+
+ };
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+ };
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ status = "disabled";
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&wdt2 {
+ status = "disabled";
+};
+
+&mcbsp1 {
+ status = "disabled";
+};
+
+&mcbsp2 {
+ status = "disabled";
+};
+
+&mcbsp3 {
+ status = "disabled";
+};
+
+&mcbsp4 {
+ status = "disabled";
+};
+
+&mcbsp5 {
+ status = "disabled";
+};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380..ccecb76 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -110,6 +110,7 @@ MACHINE_END
static const char *omap3_gp_boards_compat[] __initdata = {
"ti,omap3-beagle",
+ "timll,omap3-devkit8000",
NULL,
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
