The lgphilips panel driver now manages the gpios required to configure the
panel. This was previously done in omap_dss_device's platform_enable/disable
callbacks defined in board files using this panel.
All the board files using this panel now pass the gpio information as platform
data via the panel_generic_dpi_data struct, which is needed by the panel driver
to configure the gpios connected to the panel. Hence, the
platform_enable/disable ops can be safely removed now.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
.../omap2/displays/panel-lgphilips-lb035q02.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
index 63cd8857..4ea6548 100644
--- a/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
+++ b/drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
@@ -71,20 +71,13 @@ static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
if (r)
goto err0;
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- goto err1;
- }
-
for (i = 0; i < panel_data->num_gpios; ++i) {
gpio_set_value_cansleep(panel_data->gpios[i],
panel_data->gpio_invert[i] ? 0 : 1);
}
return 0;
-err1:
- omapdss_dpi_display_disable(dssdev);
+
err0:
return r;
}
@@ -102,9 +95,6 @@ static void lb035q02_panel_power_off(struct omap_dss_device *dssdev)
panel_data->gpio_invert[i] ? 1 : 0);
}
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
omapdss_dpi_display_disable(dssdev);
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
