Re: [PATCH] ARM: OMAP: gpmc: Add device tree documentation for elm handle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Philip Avinash <avinashphilip@xxxxxx> [130117 21:00]:
> In case ELM module available, omap2 NAND driver can opt for hardware
> correction method for bit flip errors in NAND flash with BCH. Hence the
> detection of ELM module is done through devicetree population of elm_id.
> This patch update device tree documentation for gpmc-nand for elm-id
> data population.
> 
> Signed-off-by: Philip Avinash <avinashphilip@xxxxxx>
> ---
> This patch based [1] and depends on [2]. As Artem suggested, this patch can
> go in omap_tree due to the dependency on [3].
> Discussion can found at [4]
> 
> Tony,
>   Can you accept this patch.

Thanks applying into omap-for-v3.9/gpmc.

Regards,

Tony
 
> 1. http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=shortlog;h=refs/heads/omap-for-v3.9/gpmc
> 2. mtd: nand: omap2: Support for hardware BCH error correction
>    http://git.infradead.org/users/dedekind/l2-mtd-2.6.git/commit/576daed18c3f27bb5d0e57e1df11e8f7b493dce8
> 3. ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
>    http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=commit;h=bc6b1e7b86f5d8e4a6fc1c0189e64bba4077efe0
> 4. https://lkml.org/lkml/2013/1/17/167   
> 
>  .../devicetree/bindings/mtd/gpmc-nand.txt          |    4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> index 9f464f9..e7f8d7e 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> @@ -29,6 +29,9 @@ Optional properties:
>  		"bch4"		4-bit BCH ecc code
>  		"bch8"		8-bit BCH ecc code
>  
> + - elm_id:	Specifies elm device node. This is required to support BCH
> + 		error correction using ELM module.
> +
>  For inline partiton table parsing (optional):
>  
>   - #address-cells: should be set to 1
> @@ -46,6 +49,7 @@ Example for an AM33xx board:
>  		#address-cells = <2>;
>  		#size-cells = <1>;
>  		ranges = <0 0 0x08000000 0x2000>;	/* CS0: NAND */
> +		elm_id = <&elm>;
>  
>  		nand@0,0 {
>  			reg = <0 0 0>; /* CS0, offset 0 */
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux