Include the OMAP5 data files in build. Initialise the voltage, power, clock domains and the clock tree. Cc: Paul Walmsley <paul@xxxxxxxxx> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> --- arch/arm/mach-omap2/Makefile | 6 +++++- arch/arm/mach-omap2/io.c | 9 +++++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 947cafe..5ab0b7c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -123,6 +123,7 @@ obj-$(CONFIG_ARCH_OMAP4) += voltagedomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(voltagedomain-common) obj-$(CONFIG_SOC_AM33XX) += voltagedomains33xx_data.o obj-$(CONFIG_SOC_OMAP5) += $(voltagedomain-common) +obj-$(CONFIG_SOC_OMAP5) += voltagedomains54xx_data.o # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o @@ -137,6 +138,7 @@ obj-$(CONFIG_ARCH_OMAP4) += powerdomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(powerdomain-common) obj-$(CONFIG_SOC_AM33XX) += powerdomains33xx_data.o obj-$(CONFIG_SOC_OMAP5) += $(powerdomain-common) +obj-$(CONFIG_SOC_OMAP5) += powerdomains54xx_data.o # PRCM clockdomain control clockdomain-common += clockdomain.o @@ -152,6 +154,7 @@ obj-$(CONFIG_ARCH_OMAP4) += clockdomains44xx_data.o obj-$(CONFIG_SOC_AM33XX) += $(clockdomain-common) obj-$(CONFIG_SOC_AM33XX) += clockdomains33xx_data.o obj-$(CONFIG_SOC_OMAP5) += $(clockdomain-common) +obj-$(CONFIG_SOC_OMAP5) += clockdomains54xx_data.o # Clock framework obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o @@ -171,7 +174,7 @@ obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) cclock44xx_data.o obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o obj-$(CONFIG_SOC_AM33XX) += cclock33xx_data.o -obj-$(CONFIG_SOC_OMAP5) += $(clock-common) +obj-$(CONFIG_SOC_OMAP5) += $(clock-common) cclock54xx_data.o obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o # OMAP2 clock rate set data (old "OPP" data) @@ -194,6 +197,7 @@ obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_interconnect_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o obj-$(CONFIG_SOC_AM33XX) += omap_hwmod_33xx_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o +obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 2c3fdd6..a1da83e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -38,6 +38,7 @@ #include "clock2xxx.h" #include "clock3xxx.h" #include "clock44xx.h" +#include "clock54xx.h" #include "omap-pm.h" #include "sdrc.h" #include "control.h" @@ -618,7 +619,15 @@ void __init omap5_init_early(void) omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE)); omap_prm_base_init(); omap_cm_base_init(); + omap44xx_prm_init(); omap5xxx_check_revision(); + omap54xx_voltagedomains_init(); + omap54xx_powerdomains_init(); + omap54xx_clockdomains_init(); + omap54xx_hwmod_init(); + omap_hwmod_init_postsetup(); + omap5xxx_clk_init(); + } #endif -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
