Hi Kishon,
Thanks for the explanation.
On Thu, Jan 17, 2013 at 6:01 PM, kishon <kishon@xxxxxx> wrote:
> Hi,
>
>
> On Thursday 17 January 2013 05:41 PM, Vivek Gautam wrote:
>>
>> Hi Kishon,
>>
>>
>> On Wed, Jan 16, 2013 at 8:30 PM, Kishon Vijay Abraham I <kishon@xxxxxx>
>> wrote:
>>>
>>> This is in preparation for the changes in PHY library to support adding
>>> and getting multiple PHYs of the same type. In the new design, the
>>> binding information between the PHY and the USB controller should be
>>> specified in the platform specific initialization code. So it's been
>>> done for OMAP platforms here.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>> ---
>>> This kind-of binding should be done in all the platforms (I've done only
>>> for OMAP platform).
>>> arch/arm/mach-omap2/usb-musb.c | 7 ++++++-
>>> 1 file changed, 6 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/mach-omap2/usb-musb.c
>>> b/arch/arm/mach-omap2/usb-musb.c
>>> index 9d27e3f..bbe2fa5 100644
>>> --- a/arch/arm/mach-omap2/usb-musb.c
>>> +++ b/arch/arm/mach-omap2/usb-musb.c
>>> @@ -24,6 +24,7 @@
>>> #include <linux/dma-mapping.h>
>>> #include <linux/io.h>
>>> #include <linux/usb/musb.h>
>>> +#include <linux/usb/phy.h>
>>>
>>> #include "omap_device.h"
>>> #include "soc.h"
>>> @@ -85,8 +86,12 @@ void __init usb_musb_init(struct omap_musb_board_data
>>> *musb_board_data)
>>> musb_plat.mode = board_data->mode;
>>> musb_plat.extvbus = board_data->extvbus;
>>>
>>> - if (cpu_is_omap44xx())
>>> + if (cpu_is_omap44xx()) {
>>> musb_plat.has_mailbox = true;
>>> + usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
>>> + } else if (cpu_is_omap34xx()) {
>>> + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
>>> + }
>>
>>
>> Just trying to understand things here.
>> Is the device name we are using here the platform device name (pdev->name)
>> ?
>
>
> it's pdev->dev.name.
>
>> If i am not wrong then for devices added through device tree
>> the device name would actually include the device address in the string,
>
>
> Ideally for device tree, devm_usb_get_phy_by_phandle() introduced in the 5th
> patch of this series should be used.
Ok.
> usb_bind_phy should be called from platform specific initialization files
> (like your board file), which won't get executed in dt boot.
>
Right.
>> wouldn't that make things somewhat weird, since we will have to add
>> such bindings
>> using this address string.
>>
>> one more doubt please :)
>> is it possible to bind phy in the controllers' driver somehow ?
>
> Thats not going to be good. Why do you need to do that?
>
I was certainly missing something while understanding your patches.
That's why got some doubt on this. :)
> Thanks
> Kishon
--
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
