Fix build on OMAP, the irqs are undefined on AM33xx.
These error interrupt handlers were hardcoded as disabled
so since they are unused code, simply remove them.
Signed-off-by: Matt Porter <mporter@xxxxxx>
---
arch/arm/common/edma.c | 37 -------------------------------------
1 file changed, 37 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index be3c04a..2dce245 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -494,26 +494,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
return IRQ_HANDLED;
}
-/******************************************************************************
- *
- * Transfer controller error interrupt handlers
- *
- *****************************************************************************/
-
-#define tc_errs_handled false /* disabled as long as they're NOPs */
-
-static irqreturn_t dma_tc0err_handler(int irq, void *data)
-{
- dev_dbg(data, "dma_tc0err_handler\n");
- return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_tc1err_handler(int irq, void *data)
-{
- dev_dbg(data, "dma_tc1err_handler\n");
- return IRQ_HANDLED;
-}
-
static int reserve_contiguous_slots(int ctlr, unsigned int id,
unsigned int num_slots,
unsigned int start_slot)
@@ -1538,23 +1518,6 @@ static int edma_probe(struct platform_device *pdev)
arch_num_cc++;
}
- if (tc_errs_handled) {
- status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
- "edma_tc0", &pdev->dev);
- if (status < 0) {
- dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
- IRQ_TCERRINT0, status);
- return status;
- }
- status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
- "edma_tc1", &pdev->dev);
- if (status < 0) {
- dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
- IRQ_TCERRINT, status);
- return status;
- }
- }
-
return 0;
fail:
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
