Hi Felipe,
On Thu, Jan 10, 2013 at 6:32 PM, Felipe Balbi <balbi@xxxxxx> wrote:
> Hi,
>
> On Mon, Dec 24, 2012 at 07:28:33PM +0530, Vivek Gautam wrote:
>> DWC3 controller curretly depends on CONFIG_USB and CONFIG_USB_GADGET.
>> Some hardware may like to use only host feature on dwc3.
>> So, removing the dependency of USB_DWC3 on USB_GADGET
>> and further modulating the dwc3 core to enable gadget features
>> only with USB_GADGET.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> CC: Doug Anderson <dianders@xxxxxxxxxxxx>
>
> right, right... Eventually we need to do it, but you're only making
> gadget side optional. Host side should be optional too, but then you
> need to make sure we don't build dwc3 without gadget and host.
>
Yes, true we need to make host side also optional, build dwc3 only when
either of host or gadget are built.
> Maybe make a mode selection for Host-only, Peripheral-only, Dual-Role
> Device ??
>
True this will be good idea to use modes: host only, gadget only or dual role.
May be the platform glue layers can use them later to put the controller
in a specific mode ?
> More comments below...
>
>> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
>> index f6a6e07..b70dcf1 100644
>> --- a/drivers/usb/dwc3/Kconfig
>> +++ b/drivers/usb/dwc3/Kconfig
>> @@ -1,7 +1,7 @@
>> config USB_DWC3
>> tristate "DesignWare USB3 DRD Core Support"
>> - depends on (USB && USB_GADGET)
>> - select USB_OTG_UTILS
>> + depends on USB
>> + select USB_OTG_UTILS if USB_GADGET
>
> we want USB_OTG_UTILS also on host-only builds because host side,
> eventually, will have to learn how to control its PHYs.
>
Ok.
>> select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
>> help
>> Say Y or M here if your system has a Dual Role SuperSpeed
>> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
>> index 4502648..8f469cb 100644
>> --- a/drivers/usb/dwc3/Makefile
>> +++ b/drivers/usb/dwc3/Makefile
>> @@ -5,7 +5,7 @@ obj-$(CONFIG_USB_DWC3) += dwc3.o
>>
>> dwc3-y := core.o
>> dwc3-y += host.o
>> -dwc3-y += gadget.o ep0.o
>> +obj-$(CONFIG_USB_GADGET) += gadget.o ep0.o
>
> this is wrong. CONFIG_USB_GADGET is tristate, so this should be:
>
> ifneq($(CONFIG_USB_GADGET),)
> dwc3-y += gadget.o ep0.o
> endif
>
> or something similar
>
True, missed taking into account that CONFIG_USB_GADGET is tristate :-(
Will amend this as suggested.
>> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
>> index 4999563..4dc7ef2 100644
>> --- a/drivers/usb/dwc3/core.h
>> +++ b/drivers/usb/dwc3/core.h
>> @@ -865,7 +865,14 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc);
>> int dwc3_host_init(struct dwc3 *dwc);
>> void dwc3_host_exit(struct dwc3 *dwc);
>>
>> +#ifdef CONFIG_USB_GADGET
>
> not taking into account module builds.
>
ditto
>> int dwc3_gadget_init(struct dwc3 *dwc);
>> void dwc3_gadget_exit(struct dwc3 *dwc);
>> +#else
>> +static inline int dwc3_gadget_init(struct dwc3 *dwc)
>> +{ return -EINVAL; }
>> +static inline void dwc3_gadget_exit(struct dwc3 *dwc)
>> +{ }
>> +#endif
>>
>> #endif /* __DRIVERS_USB_DWC3_CORE_H */
>> diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
>> index d4a30f1..553bbaa 100644
>> --- a/drivers/usb/dwc3/debugfs.c
>> +++ b/drivers/usb/dwc3/debugfs.c
>> @@ -535,7 +535,8 @@ static ssize_t dwc3_testmode_write(struct file *file,
>> testmode = 0;
>>
>> spin_lock_irqsave(&dwc->lock, flags);
>> - dwc3_gadget_set_test_mode(dwc, testmode);
>> + if (dwc3_gadget_set_test_mode(dwc, testmode))
>> + dev_dbg(dwc->dev, "host: Invalid request\n");
>> spin_unlock_irqrestore(&dwc->lock, flags);
>>
>> return count;
>
> wrong, if you don't have gadget mode, you just don't create this file.
>
dwc3-core makes call to dwc3_debugfs_init() invariably depending on DEBUG_FS.
Will this not go ahead and create this file ?
I think i am missing here something. :-(
>> @@ -638,7 +639,8 @@ static ssize_t dwc3_link_state_write(struct file *file,
>> return -EINVAL;
>>
>> spin_lock_irqsave(&dwc->lock, flags);
>> - dwc3_gadget_set_link_state(dwc, state);
>> + if (dwc3_gadget_set_link_state(dwc, state))
>> + dev_dbg(dwc->dev, "host: Invalid request\n");
>
> likewise.
>
>> spin_unlock_irqrestore(&dwc->lock, flags);
>>
>> return count;
>> diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
>> index 99e6d72..28e82db 100644
>> --- a/drivers/usb/dwc3/gadget.h
>> +++ b/drivers/usb/dwc3/gadget.h
>> @@ -105,8 +105,16 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
>> void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
>> int status);
>>
>> +#ifdef CONFIG_USB_GADGET
>
> not taking into account CONFIG_USB_GADGET=m
>
missed taking into account that CONFIG_USB_GADGET is tristate :-(
Will amend this patch accordingly.
--
Thanks & Regards
Vivek
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
