On Thu, Jan 10, 2013 at 01:46:53PM -0600, Nishanth Menon wrote: > On 14:35-20130110, Matt Porter wrote: > > On Sun, Oct 28, 2012 at 05:01:29PM +0530, Sekhar Nori wrote: > > > On 10/18/2012 6:56 PM, Matt Porter wrote: > > > > Adds AM33XX SPI support for am335x-bone and am335x-evm. > > > > > > > > Signed-off-by: Matt Porter <mporter@xxxxxx> > > > > --- > > > > arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++ > > > > arch/arm/boot/dts/am335x-evm.dts | 9 ++++++++ > > > > arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++ > > > > 3 files changed, 69 insertions(+) > > > > > > > > diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts > > > > index 5510979..23edfd8 100644 > > > > --- a/arch/arm/boot/dts/am335x-bone.dts > > > > +++ b/arch/arm/boot/dts/am335x-bone.dts > > > > @@ -18,6 +18,17 @@ > > > > reg = <0x80000000 0x10000000>; /* 256 MB */ > > > > }; > > > > > > > > + am3358_pinmux: pinmux@44e10800 { > > > > + spi1_pins: pinmux_spi1_pins { > > > > + pinctrl-single,pins = < > > > > + 0x190 0x13 /* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */ > > > > + 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */ > > > > + 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */ > minor comment: > doing as a 0x33 is better for both d1, d0 as D0,D1 can be switched between SDI and SDO > as needed with ti,pindir-d0-out-d1-in Yes, thanks. Forgot about the new property and feature even though I told somebody about it yesterday. :) > > > > + 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */ > > > > + >; > > > > > > Is there a single pinmux setting that provides SPI functionality on the > > > bone headers? Or this is specific to a cape you tested with? > > > > No, there are two usable settings for spi1 and one setting for spi0. > > I'm dropping this from the series since it's specific to how I wired up > > the homebrew cape I use for spi testing on the Bone. I publish the > > branch where all these extra "test-specific" patches (that aren't intended > > to be merged) are at in the cover letter. Anybody that needs context of > > how/what worked and was tested can grab them there. > Possibly dumb question: > Cant we have pre-usable spi configurations? Like spi1_configuration1_pins, > spi2_configuration1_pins, spi0_configuration1_pins? If documented with > P9 pin names in the bone dts, it saves a bit of effort in looking up > pad offset when dealing with capes. Yes, let's introduce these things separately. I plan to reintroduce patches to fix the incorrect 1-based numbering on many of the AM33xx as previous ones were dropped...and I think this makes sense on top of that. -Matt > -- > Regards, > Nishanth Menon > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html