Add device-tree nodes for the two Cross Trigger Interface (CTI) modules
in the OMAP4 devices.
Signed-off-by: Jon Hunter <jon-hunter@xxxxxx>
---
arch/arm/boot/dts/omap4.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 739bb79..40270c7 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -59,6 +59,29 @@
interrupts = <1 13 0x304>;
};
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cti0: cti@0x54148000 {
+ compatible = "arm,primecell";
+ interrupts = <0 1 0x4>;
+ reg = <0x54148000 0x1000>;
+ arm,cti-name = "cti0";
+ arm,primecell-periphid = <0x003bb906>;
+ };
+
+ cti1: cti@0x54149000 {
+ compatible = "arm,primecell";
+ interrupts = <0 2 0x4>;
+ reg = <0x54149000 0x1000>;
+ arm,cti-name = "cti1";
+ arm,primecell-periphid = <0x003bb906>;
+ };
+ };
+
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
