Hi Matthias, On 12/12/2012 04:33 PM, Matthias Brugger wrote: > This patch is a follow-up patch for Javier Martinez effort adding initial > device tree support to IGEP technology devices. [1] > > It adds uart1 and uart2 bindings to the generic dtsi for the IGEP boards. > > [1] http://www.spinics.net/lists/linux-omap/msg83409.html > > Signed-off-by: Matthias Brugger <matthias.bgg@xxxxxxxxx> > --- > arch/arm/boot/dts/omap3-igep.dtsi | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi > index 125fe00..c02e3c0 100644 > --- a/arch/arm/boot/dts/omap3-igep.dtsi > +++ b/arch/arm/boot/dts/omap3-igep.dtsi > @@ -27,6 +27,20 @@ > }; > > &omap3_pmx_core { > + uart1_pins: pinmux_uart1_pins { > + pinctrl-single,pins = < > + 0x152 0x100 /* uart1_rx.uart1_rx INPUT | MODE0 */ > + 0x14c 0 /* uart1_tx.uart1_tx OUTPUT | MODE0 */ > + >; > + }; > + > + uart2_pins: pinmux_uart2_pins { > + pinctrl-single,pins = < > + 0x14a 0x100 /* uart2_rx.uart2_rx INPUT | MODE0 */ > + 0x148 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ > + >; > + }; > + > uart3_pins: pinmux_uart3_pins { > pinctrl-single,pins = < > 0x16e 0x100 /* uart3_rx.uart3_rx INPUT | MODE0 */ > @@ -77,6 +91,16 @@ > status = "disabled"; > }; > > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_pins>; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart2_pins>; > +}; > + > &uart3 { > pinctrl-names = "default"; > pinctrl-0 = <&uart3_pins>; > That looks good to me. I'll apply it on top of javier's series for 3.9. Thanks, Benoit -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html