Re: AM335x BeagleBone SPI Issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Dec 11, 2012 at 04:24:52PM +0000, Jack Mitchell wrote:
> On 11/12/12 15:22, Ben Gamari wrote:
> >Jack Mitchell <ml@xxxxxxxxxxxxxxxxxxx> writes:
> >
> >>Shubhro, Felipe,
> >>
> >>Thank you, the reordering dma patch fixed the dma issue I was having!
> >>However, the bad news, I now get the same results for the dma and
> >>non-dma spidev test. While the scope shows the SPI clk and data is fine,
> >>the reading from the program still shows 0x00 for all words.
> >>
> >Just to make sure this has been thought of: I've seen this sort of
> >behavior in the past when the CLK pin wasn't configured as an input.
> >
> >Cheers,
> >
> >- Ben
> >
> 
> Ok, Ben, well spotted indeed! I changed the dtsi to use INPUT_PULLUP
> instead of OUTPUT_PULLUP and wallah!
> 
>   am3358_pinmux: pinmux@44e10800 {
>     spi0_pins: pinmux_spi0_pins {
>       pinctrl-single,pins = <
>         0x150 *0x30*      /* spi0_sclk.gpio0_2, INPUT_PULLUP | MODE0
> */<------------ changed to INPUT
>         0x154 0x30      /* spi0_d0.gpio0_3, INPUT_PULLUP | MODE0 */
>         0x158 0x10      /* spi0_d1.i2c1_sda, OUTPUT_PULLUP | MODE0 */
>         0x15c 0x10      /* spi0_cs0.i2c1_scl, OUTPUT_PULLUP | MODE0 */
>       >;
>     };
>     spi1_pins: pinmux_spi1_pins {
>       pinctrl-single,pins = <
>         0x190 *0x33*  /* mcasp0_aclkx.spi1_sclk, INPUT_PULLUP | MODE3
> */ <------------ changed to INPUT
>         0x194 0x33  /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
>         0x198 0x13  /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
>         0x19c 0x13  /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
>       >;
>     };

funny, I did the same on my pandaboard and it still didn't work :-s

@@ -321,6 +322,10 @@ static struct omap_board_mux board_mux[] __initdata = {
        OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
        OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
        OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+
+       /* SPI1 */
+       OMAP4_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+
        /* gpio 0 - TFP410 PD */
        OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
        /* dispc2_data23 */

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux