On Wed, 5 Dec 2012 10:49:45 +0100, Peter Ujfalusi <peter.ujfalusi@xxxxxx> wrote: > When the GPIO is configured as output we need to read the GPIODATAOUT* > register to get correct information. When the GPIO is output the GPIODATAIN* > registers report 0 all the time (no feedback from output path). > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > --- > drivers/gpio/gpio-twl4030.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c > index 55b4fe4..e7aa620 100644 > --- a/drivers/gpio/gpio-twl4030.c > +++ b/drivers/gpio/gpio-twl4030.c > @@ -191,13 +191,19 @@ static int twl4030_get_gpio_datain(int gpio) > u8 d_bnk = gpio >> 3; > u8 d_off = gpio & 0x7; > u8 base = 0; > + int direction; > int ret = 0; > > if (unlikely((gpio >= TWL4030_GPIO_MAX) > || !(gpio_usage_count & BIT(gpio)))) > return -EPERM; > > - base = REG_GPIODATAIN1 + d_bnk; > + direction = gpio_twl4030_read(REG_GPIODATADIR1 + d_bnk); > + if (direction > 0 && (direction >> d_off) & 0x1) > + base = REG_SETGPIODATAOUT1 + d_bnk; > + else > + base = REG_GPIODATAIN1 + d_bnk; > + This is probably quite expensive considering that reads need to go out the i2c bus. Things like the output state and the pin direction should be cached by the driver in its private data structure so that you don't add an additional i2c round trip. g. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
