This is a handy macro to check if the port requires the
USB TLL module or not. Use it to Enable the TLL module and manage
the clocks.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/mfd/omap-usb-tll.c | 20 ++++++++++++--------
1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/mfd/omap-usb-tll.c b/drivers/mfd/omap-usb-tll.c
index 7d0f6cf..07370a3 100644
--- a/drivers/mfd/omap-usb-tll.c
+++ b/drivers/mfd/omap-usb-tll.c
@@ -95,6 +95,10 @@
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
+/* only PHY and UNUSED modes don't need TLL */
+#define omap_usb_mode_needs_tll(x) ((x != OMAP_USBHS_PORT_MODE_UNUSED) &&\
+ (x != OMAP_EHCI_PORT_MODE_PHY))
+
struct usbtll_omap {
int nch; /* num. of channels */
struct usbtll_omap_platform_data *pdata;
@@ -211,6 +215,7 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
unsigned long flags;
int ret = 0;
int i, ver;
+ bool needs_tll;
dev_dbg(dev, "starting TI HSUSB TLL Controller\n");
@@ -278,12 +283,11 @@ static int __devinit usbtll_omap_probe(struct platform_device *pdev)
tll->ch_clk[i] = fck;
}
- if (is_ehci_tll_mode(pdata->port_mode[0]) ||
- is_ehci_tll_mode(pdata->port_mode[1]) ||
- is_ehci_tll_mode(pdata->port_mode[2]) ||
- is_ohci_port(pdata->port_mode[0]) ||
- is_ohci_port(pdata->port_mode[1]) ||
- is_ohci_port(pdata->port_mode[2])) {
+ needs_tll = false;
+ for (i = 0; i < tll->nch; i++)
+ needs_tll |= omap_usb_mode_needs_tll(pdata->port_mode[i]);
+
+ if (needs_tll) {
/* Program Common TLL register */
reg = usbtll_read(base, OMAP_TLL_SHARED_CONF);
@@ -371,7 +375,7 @@ static int usbtll_runtime_resume(struct device *dev)
spin_lock_irqsave(&tll->lock, flags);
for (i = 0; i < tll->nch; i++) {
- if (is_ehci_tll_mode(pdata->port_mode[i])) {
+ if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
int r;
if (!tll->ch_clk[i])
@@ -407,7 +411,7 @@ static int usbtll_runtime_suspend(struct device *dev)
spin_lock_irqsave(&tll->lock, flags);
for (i = 0; i < tll->nch; i++) {
- if (is_ehci_tll_mode(pdata->port_mode[i])) {
+ if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
if (tll->ch_clk[i])
clk_disable(tll->ch_clk[i]);
}
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
